I did a search but couldnt find a definite answer. Will the 325/60/18 Nittos fit on my 05 FX4 with stock wheels and no leveling kit? Thanks-Dan

 

I don't know the height of those tires, but I doubt it would require a leveling kit. However, I don't think the stock rim will accommodate a 325 width.

 

I've read that you can fit 305/65-18's on stock rims with out a leveling kit. But the 325 is too much tire for stock 7.5" wide rims.

 

I have the nitto mud grapplers on my stk wheeles 35/12.50/18's are my sizebut i also have a 3-inch lift kit and i have a leveling kit. You will have some rub on full turns as i do... I'm either going to get spacers or nre wheels soon.

MArk

 

no bud, sorry.. even w a lift they still rub the control arms, if i had the cash id go ahead and get some 10in wide rims w atleast a 5" BS.. I ran them on my stocker and rubbed the shiit out of my control arms

 

I also have the 35" 12.5" wide Mud grapplers on my truck but with a 6" lift I had to cut off some of the bumper to keep them from rubbing in full turns. 8" lift would be better for these tires.

 

I guess I'll need to look at the 305s instead. Thanks guys.