Archived Oklahoma Buy/Sell/Trade Ads
#61
Wanted: steel tubing and plate steel
Wanted: 4"x4" square tubing, 1/8 or 1/4 inch walls, at least 4 foot long sections...i need at least 6-8 4 foot sections to do some frame work on my 4x4....i also need a 4 foot section of 4"x8" tubing as well about the same thickness....and i need some 1/4" plate steel as well at least 5"x5"....im going to hit up some scrap yards too, i figured id post up to see if anyone has any extra lying around......
#65
Looking for S10 T5 trans
Need the tail housing from a Borg Warner T5 5 speed trans from an S10 for my '55 F100 project. Will consider buying a complete trans to get this part.
Last edited by rogerf100; 01-01-2006 at 11:50 AM.
#66
Wanted: One trustworthy and running vehicle for around $1000. A buddy of mine at work is in a hard way and needs new transportation. He lives and works in Tulsa. He doesn't care if it's a car or truck. He just wants something dependable.(Don't know if that's possible for that price.) But I told him I would keep my ears open. Thanks in advance.
#68
Wanted: SuperCab Body to Frame Mounts.....
I need 4, 73-79 supercab body mounts....i need the whole setup if possible, i really need the metal "stand" parts, that are rivoted to the outside of the framerails...i am willing to travel for them if the price is right....
#71
free bedliner, claremore swb superduty
I pulled the drop in bed liner out of my 99 f-250 swb. If anybody wants it I would be willing to give it away in the Claremore area.
#72
16" 1/2 ton Rims Needed-PLEEEEASE
I REALLY need a set of factory 16" rims for my 56 half ton. I can find them on Ebay for 10 to 20 each but they seem to look different. At this point as long as they are 16" 1/2 ton (5 x 5.5) factory rims I would be interested. The factory rims were either 5.5 or 6 inches wide. I got "Lucille" driving last Saturday and as soon as I get the fuel tank lined, she will be road worthy. PLEEEEEEEEEEEEEEEEEEEEEEESE if you know of a set, let me know. I will travel anywhere in OK, northerm Tx, or southern Ks to pick them up and would part with a $100 bill for the set
Jayfarmlaw@sbcglobal.net
Tuttle, OK
Jayfarmlaw@sbcglobal.net
Tuttle, OK
#73
If I knew of any rims like that, I'd help ya out, but I don't.
Anybody here know where to find a 91-93 5.0 (preferable HO)? I'm looking for one for my Bronco II, I decided to go ahead with the 5.0 swap. Also, anyone know where to find an AOD tranny? Thanks.
Anybody here know where to find a 91-93 5.0 (preferable HO)? I'm looking for one for my Bronco II, I decided to go ahead with the 5.0 swap. Also, anyone know where to find an AOD tranny? Thanks.
#74
1981 320/aod
From a Lincoln Mark, had a puter and TBI, have a carb and early distributor for it, has p/s pump, alternater. $ 350.00. Would concider a trade as I need some '54 pick up peices. e mail is deadheadno1_@_aol.com (leave out the spaces) or call me at 405/787-6120, Tom .
#75
Wanted OEM Ford Truck/Bronco Wheels
Fellow Okies, I'm looking for a set of Ford Factory wheels that came on the 92-96 Ford Truck and/or Bronco. The Ford number is 3026 and they are chrome. They have five slots in a fan like pattern. I spent the better part of Satruday driving all over Tulsa looking for a set of these and after $40 in gas came up empty handed. I could pick them up off ebay but I want to visually inspect what I am buying. Anybody? Please e-mail me.
Thanks,
John
Thanks,
John