Archived Oklahoma Buy/Sell/Trade Ads
#257
Dp you have the carrier itself? and if so is it limited slip or not?
#260
'65 F-100 Restoration Stopped
Unfortunately, I have to stop my restoration project of a '65 F-100 Long Bed. The truck has been disassembled and the front suspension and rear end rebuilt. I have many original parts available. There are too many to list. I want them to go to a good home, so I'm making them available to forum members of the Oklahoma chapter first (I live in SE OK). Let me know what you need and I'll check what I have in the garage. I'm not out to make money, just break even, so prices will be extremely reasonable.
#261
Hey I have a 89 f350 and I'm looking for some better wheels (nicer) don't have to be chrome and don't have to be 16" actually would like 18" or 16.5 and bigger tires something around a 34" to 37" Mud or AT.
thanks
thanks
#264
selling a 5.5' suspension lift off an early bronco. its a wild horse lift with shocks,drop pit-man arm, rear springs, front springs. I'm going to a smaller lift so I have no need for this stuff any more. figured I would let you guys have first shot. This stuff is brand new, no miles on it. Also have a set of 35x12.5 tires for sale.
#265
selling a 5.5' suspension lift off an early bronco. its a wild horse lift with shocks,drop pit-man arm, rear springs, front springs. I'm going to a smaller lift so I have no need for this stuff any more. figured I would let you guys have first shot. This stuff is brand new, no miles on it. Also have a set of 35x12.5 tires for sale.
#269
If anyone wants a 9" Rear 3.00:1 gears. Complete with backing plates,brakes, and drums hit me up. I need to get it out of the garage. I no longer want to hold onto it for parts. edit: I believe the 3rd member need the backlash set on the ring and pinion, or the spider gears replaced. The reason i took it out of my truck was it had slop in it. I got it from Gary Lewis about 2 years ago when the original axle in my truck exploded the driver's side wheel bearing.
$100
I'm in Collinsville/Owasso area off East 126th Street North.
Last edited by RAY1986F150; 11-23-2012 at 01:27 PM. Reason: left out details
#270
Oh, nevermind then.
If anyone wants a 9" Rear 3.00:1 gears. Complete with backing plates,brakes, and drums hit me up. I need to get it out of the garage. I no longer want to hold onto it for parts. edit: I believe the 3rd member need the backlash set on the ring and pinion, or the spider gears replaced. The reason i took it out of my truck was it had slop in it. I got it from Gary Lewis about 2 years ago when the original axle in my truck exploded the driver's side wheel bearing.
$100
I'm in Collinsville/Owasso area off East 126th Street North.
If anyone wants a 9" Rear 3.00:1 gears. Complete with backing plates,brakes, and drums hit me up. I need to get it out of the garage. I no longer want to hold onto it for parts. edit: I believe the 3rd member need the backlash set on the ring and pinion, or the spider gears replaced. The reason i took it out of my truck was it had slop in it. I got it from Gary Lewis about 2 years ago when the original axle in my truck exploded the driver's side wheel bearing.
$100
I'm in Collinsville/Owasso area off East 126th Street North.