Danny's? I am new to Tulsa area so i am unfamiliar with most salvage yards around here. Where is Danny's? Thanks for keeping an eye out for me. If you happened to find something on my list I would be happy to pay you to buy it, as long as its in good shape of course. Thanks!

Rock It

 

Danny's is on 46th street north. Depending on where you are, take 169 to 46th street north and head west. It's about mile and a half or so on the north side of the street.

 

Okay, thats on my way home. I get off at 36th street to go to work everyday. Thanks alot! I will probably try to get out there this weekend. Why do you suggest Danny's? Are they known for having alot of older trucks like mine?

Its too early

 

Never been in there, just seen beds neatly stacked/shelved when I drive past. Was at North Yale Auto Parts today. 116th street north and Yale (near hwy75). Didn't have what I was hunting, but saw some older Ford trucks. I was getting tired and had to come home to take a nap (worked last night). Son and I are headed to LKQ Saturday. They are on Peoria couple miles south of 46th Street North. I think they are right off hwy11, but don't quote me on that. Both North Yale and LKQ allow you to walk around the yard.

Since you get off at 36th Street for work, you just might work at the same place as me.

 

I take 36th street around to tiger switch and I work on 170th and Pine. CRTS Inc. Where you work? DMI or the quarries?

 

I go the other way, AA.

 

OKAY GUYS. I GOT A BED TOPPER I WANT TO SELL TO GET IT OUT OF MY YARD. I BOUGHT IT A COUPLE MONTHS AGO NEEDING IT TO DO SOME WORK AND I ENDED UP NOT NEEDING IT. I PAID $100. I WILL LET IT GO FOR $75. FIRST COME FIRST SERVE. ITS ALL ALUMINUM. FOR 8 FOOT BED. THIRD BRAKE LIGHT. POP OUT SIDE WINDOWS. DARK GRAY EXTERIOR. I AM IN COLLINSVILLE ABOUT 1/2 MILE NORTH OF HWY 20 AND THE REASORS MARKET. IF YOU WANT IT PM ME.

 

I have a list of parts that are just taking up space around the place.


1995 302 motor compleate throdle body to pan has the accessory brackets with power steering pump and ac compressor still with it. It ran when pulled about two months ago. Has alot of the wiring and coil still attached also. 250 bucks to you guys.

three speed top loader trans. It came out of a bronco but should fit a mustang too. it has close ratio gears in it now and have the wide ratio to go with it also. Comes with a bellhousing that will fit either five bolt or six bolt blocks. 150 bucks
I also have a 40 pound flywheel and pressure plate that could be included too.

Ac condenser for a 95 ford truck 10 bucks

Head light and tail light assmblys for a 95 truck, one turn signal has hole in it make offer

Solid back glass for a 2003 ford ranger, fits many other years but dont know for shure. 50 bucks

tailgate off 95 ford truck. few minor dents not rusted out 50 bucks

assorted 429/460 blocks and cranks price depends on what you need

a 5 bolt 289 short block, will need to be rebuilt 100 bucks

3.50 ring and pinion for a 9 inch, used 50 bucks
and extra 10 bucks for the new instalation kit.

C-4 tranny shield that will not recertify comes with all hardware 30 bucks

I can send pictures if you need them just let me know.

 

How much for the AC compressor only? I just bought a truck and rebuilt the motor and trans. I haven't hooked the AC back up yet. I don;t even know if the compressor is good. Wouldn't hurt to have a spare. PM me with your contact info and i will try to pick it up tomorrow after work if the price is decent. I work near Catoosa and will be by Petsmart on 41st and Hwy44 later on.

 

I found a guy at work who might want your tailgate. Private message me.

 

I sold the motor but kept the compressor. Still have all other parts

more stuff
A/c compressor off 95 ford truck $50

Aode trans that needs to be gone through, I pretty shure the converter was at fault but
dont know if anything else is wrong $50

1998 ford expedition, has 20' harley davison wheels with new tire with less than 3000 miles on tires. Has 5.4 motor that has been replaced with one with less miles, orriginal one spun a bearing. flowmaster exaust, leather seats that need recovering. electric locks and windows. CD player not installed yet if I get time it will be. runs and drives good but needs cosmetic work. $3500 text me for pictures.

 

Price change on the expedition 3000 really need to sell this thing.

and 35 bucks on the aode trans

 

I sold the topper I had listed above.

 

Bump. Still looking. Truck is now nearing driveable status, so this item is now a bit higher on the want list.

 

took some pictures of the expodition if anyone is interested.