Archived WV Buy/Sell/Trade Ads
#47
Join Date: Sep 2006
Location: Across from the neighbors
Posts: 5,181
Likes: 0
Received 1 Like
on
1 Post
Got a reacently pulled 460/c6 combo that ran good but got a couple parts scavenged off of. Another 460 that needs rebuilt. Few other c6s. Complete 78/9 f250 4wd rollin chassis. Several 73-79 frames and body parts. Buch of half and 3/4ton rears. Make me a decent offer on anything you need.
#48
I'm looking for a running 351w, prefer 92-96 era, can use a little older maybe, but I'm not sure what is compatible. I can re-use my intake and accessories but I don't know if my heads are usable at this time.
Southern WV, south western VA area, however I'd go further if the price is right. Thanks for any help.
Southern WV, south western VA area, however I'd go further if the price is right. Thanks for any help.
#49
i need the core/radiator support for the truck in my sig.. mines about done. i know i can get one off ebay for $140 or probably a rusted one thats as bad as mine from one of the junkyards for 125. if anyones got one send me a pm please.
also if anyone have a tonneau or rear bumper for a flareside let me know as well.
also if anyone have a tonneau or rear bumper for a flareside let me know as well.
#56
sell or trade anything
79 Mustang GT Ghia hatch w/title no motor no trans,
69 closed chamber 302 heads,
ported e7's,
3.8 mustang motor ran when pulled,
C6 trans,
49 mercury frame with a flathead v8 3 speed trans and rear end,
wheels and tires of all sizes,
390 block and crank,
351/400m parts,
carbs,
holly fuel injection system,
pontiac 350 400 455 heads intake manifolds sell or trade anything
all kind of goodies.
79 Mustang GT Ghia hatch w/title no motor no trans,
69 closed chamber 302 heads,
ported e7's,
3.8 mustang motor ran when pulled,
C6 trans,
49 mercury frame with a flathead v8 3 speed trans and rear end,
wheels and tires of all sizes,
390 block and crank,
351/400m parts,
carbs,
holly fuel injection system,
pontiac 350 400 455 heads intake manifolds sell or trade anything
all kind of goodies.
#57
I'd hate to say it guys but im thinking about selling/trading my 95 f150. i dont have to sell or trade it i just want to see whats out there. I would be interested in trading it for another OBS Ford truck. preferably a powerstroke or something lifted but i would be interested in any lifted 4x4. has to be a truck though. maybe a lifted jeep. i dont have any updated pictures since i put the new lights and grille guard on so itll take a few days and ill update the post. heres a lift of everything thats been done to it.
1995 Ford F150 Extended Cab Flareside with an automatic 5.0 and automatic locking hubs with 94,000.
I’ve had this truck for almost two years now. When I bought it, it had a roll pan, an aftermarket CD player with aux in, and 77k miles. In the past two years that I’ve had it I’ve replaced/added:
Spark plugs
Plug wires
Rotor and cap
Air filter
Fuel filter
Passenger side window motor
Stainless window vent visors
Front brakes and rotors
Transmission serviced
Windshield washer pump
Inner and outer wheel bearings
U joints in rear driveshaft
Oil cap
EGR Valve
Throttle Position Sensor (TPS)
Tinted Taillights
Grille Guard
Vacuum hoses
EVR
SI/DO Flowmaster Original 40
Spray in bedliner on tailgate and bed rails
Core Support
Smoked headlights, corner lights, and bumper lights
LED Dash and HVAC lights
CB with dual antennas mounted in the bed
31x10.5 BFG A/T ko’s
Superlift Leveling kit (springs)
I have receipts for everything ive purchased for the truck and most of the receipts from the previous owners. I also have a brand new set of MOOG ball joints for the truck.
1995 Ford F150 Extended Cab Flareside with an automatic 5.0 and automatic locking hubs with 94,000.
I’ve had this truck for almost two years now. When I bought it, it had a roll pan, an aftermarket CD player with aux in, and 77k miles. In the past two years that I’ve had it I’ve replaced/added:
Spark plugs
Plug wires
Rotor and cap
Air filter
Fuel filter
Passenger side window motor
Stainless window vent visors
Front brakes and rotors
Transmission serviced
Windshield washer pump
Inner and outer wheel bearings
U joints in rear driveshaft
Oil cap
EGR Valve
Throttle Position Sensor (TPS)
Tinted Taillights
Grille Guard
Vacuum hoses
EVR
SI/DO Flowmaster Original 40
Spray in bedliner on tailgate and bed rails
Core Support
Smoked headlights, corner lights, and bumper lights
LED Dash and HVAC lights
CB with dual antennas mounted in the bed
31x10.5 BFG A/T ko’s
Superlift Leveling kit (springs)
I have receipts for everything ive purchased for the truck and most of the receipts from the previous owners. I also have a brand new set of MOOG ball joints for the truck.
#59
Read the rules
Scape is paying $10 a hundred and I have the day off tomorrow and the wife wants our place cleaned up ASAP for the holidays . I wanted to give away stuff, that members here may want. Looks like there are way to many hoops to jump through to give something away here, and so little time. If the right members can intervene, so I can give away to local members, let me know. I promise this stuff is free, just need it gone.............JR