Archived MO Buy/Sell/Trade Ads
#466
Need bumper.
I do not per say have a specific Ford part "for sale" more like "what do you need" and I bet I either have it (if its 73-79) or can get it from my local Jy and can ship.
I have a few parts trucks/bronco's and a ton of parts, just ask Alan, Jeff, they have been here.
Complete axles, body panels, a spare cab, tires and wheels, chrome, spare front clip....
I have a few parts trucks/bronco's and a ton of parts, just ask Alan, Jeff, they have been here.
Complete axles, body panels, a spare cab, tires and wheels, chrome, spare front clip....
I need a "flat back" bumper and will trade my 87 chrome bumper with not only the top anti-slip rubber but the center "wrap around" moulding exclusive to my XLT Lariat and the bumper is "like new condition.
As long as the bumper is straight I do not care about the chrome as I am going to powder coat it anyway and install a draw-tite hitch, or Alan is I should say.
Rich, I have 2 local boneyards but they only have approximately 20 or so Ford Trucks.
Please advise and thanks!
Loony Boon
Postscript: Dalton probably informed you already but he is looking for a good blue bench seat with center arm rest console with or without cupholders.
#467
Well do you want one like this, or this? I will keep and eye out when I get back home when I am making part laps up at my local JY.
#468
Flat Back Bumper
Hello and good evening Rich.
I want a bumper exactly like Dalton's on the first page of his thread: "My Southern Belle Build."
Thank you
Loony Boon
I want a bumper exactly like Dalton's on the first page of his thread: "My Southern Belle Build."
Thank you
Loony Boon
#471
Precisely.
Hello Rich
Yes, exactly like the one pictured but no diamond plate and chrome is unimportant as it will be powdered coated black.
I just want a very straight bumper and I will ask Alan to fabricate a "draw-tite" style hitch as he is fabricating a front cross member for the front with a hitch as well.
My bumper is as I stated previously in excellent almost new looking and we can swap or whatever you decide so send me a PM of the terms.
On another topic I disassembled my laptop down to the system board which I do 3-4 times a year(cleaning) and when I pulled the 1/4" plug connector for the cooling fan the base came off of the system board! I took a chance and super glued it and IT WORKS LIKE NEW? That super glue obviously then will transmit electricity. I did a fresh install of the OS and have been installing 150 updates among other freeware.
Check this: I ordered a $6,000 Tower only from Dell(credit line for 10 years) and received a $1800 discount as I am a Small Business Customer and loyal to Dell.
I build them myself and it has dual 6 core processors which equates to 24 singles and dual 256 GB Solid State Drives with RAID 1 and spared absolutely no expense. It will be lightning fast and I am running Dual FP Monitors(I may go to 4). It is like an Enzo Ferrari. I am no mechanic but I know very well how to build a Computer System as I used to have a $25,000 Credit Line with Dell.
Now everyone knows that I am a geek and a technology freak.
Hey, a geek and a freak and a Loony Boon; what a combination! Ha ha!
I do know my way around Computers just not vehicles. Ho hum.
Loony Boon
Postscript: I am also Schizophrenic so now you know; big deal.
Yes, exactly like the one pictured but no diamond plate and chrome is unimportant as it will be powdered coated black.
I just want a very straight bumper and I will ask Alan to fabricate a "draw-tite" style hitch as he is fabricating a front cross member for the front with a hitch as well.
My bumper is as I stated previously in excellent almost new looking and we can swap or whatever you decide so send me a PM of the terms.
On another topic I disassembled my laptop down to the system board which I do 3-4 times a year(cleaning) and when I pulled the 1/4" plug connector for the cooling fan the base came off of the system board! I took a chance and super glued it and IT WORKS LIKE NEW? That super glue obviously then will transmit electricity. I did a fresh install of the OS and have been installing 150 updates among other freeware.
Check this: I ordered a $6,000 Tower only from Dell(credit line for 10 years) and received a $1800 discount as I am a Small Business Customer and loyal to Dell.
I build them myself and it has dual 6 core processors which equates to 24 singles and dual 256 GB Solid State Drives with RAID 1 and spared absolutely no expense. It will be lightning fast and I am running Dual FP Monitors(I may go to 4). It is like an Enzo Ferrari. I am no mechanic but I know very well how to build a Computer System as I used to have a $25,000 Credit Line with Dell.
Now everyone knows that I am a geek and a technology freak.
Hey, a geek and a freak and a Loony Boon; what a combination! Ha ha!
I do know my way around Computers just not vehicles. Ho hum.
Loony Boon
Postscript: I am also Schizophrenic so now you know; big deal.
#472
The silver trucks bumper is a temp and better than what was on it (a contour style) and I might be entertaining the possibility to sale it. The bottom blackish one in the pic with 2 I would sale for alot less cause it heed some straightening, but its not bad.
How about G2G time I put it in the back of what ever I drive up there and we can go from there?
How about G2G time I put it in the back of what ever I drive up there and we can go from there?
#476
Rear Bumper.
The silver trucks bumper is a temp and better than what was on it (a contour style) and I might be entertaining the possibility to sale it. The bottom blackish one in the pic with 2 I would sale for alot less cause it heed some straightening, but its not bad.
How about G2G time I put it in the back of what ever I drive up there and we can go from there?
How about G2G time I put it in the back of what ever I drive up there and we can go from there?
Cancel installing the bumper for the G2G as I will have Alan fabricate both F/R Bumpers made from Aluminum Sheet.
I did not want you to spend your time installing the bumper as you have enough to do. Agreed?
Thanks anyway!
Mark
#477
Ok by me Mark.
To any other new Missouri chapter folks that stop by here, always post up what you might need pieces and parts wise before buying. One of us is bound to have one, two or even three of what you might need. Some of us in the 73-79 dept are pretty "parts heavy"....some of us are REAL heavy on parts. lol
Alan (earthquake68) can always build a better one, than can be bought anyway. And is our local machinist/fabricator/body and paint guru. And Add Chip in the dept also.
RC has the old stuff, Chip and Dave are always parts sources too, and Jeff is a Ford truck parts scrounger just as much.
With good folks spread out all over MO, there is bound to be some OEM parts somewhere.
That also goes with rims&tires, lift kits maybe even a off brand part, just ask.
To any other new Missouri chapter folks that stop by here, always post up what you might need pieces and parts wise before buying. One of us is bound to have one, two or even three of what you might need. Some of us in the 73-79 dept are pretty "parts heavy"....some of us are REAL heavy on parts. lol
Alan (earthquake68) can always build a better one, than can be bought anyway. And is our local machinist/fabricator/body and paint guru. And Add Chip in the dept also.
RC has the old stuff, Chip and Dave are always parts sources too, and Jeff is a Ford truck parts scrounger just as much.
With good folks spread out all over MO, there is bound to be some OEM parts somewhere.
That also goes with rims&tires, lift kits maybe even a off brand part, just ask.
#479
Lee is a jeep guy...there is one old Jeep in my local JY and not much left of it, but what do you need?
There is a place called Clements in Branson, big time Jeep part place.
Clements Auto Body & Salvage
There is a place called Clements in Branson, big time Jeep part place.
Clements Auto Body & Salvage
#480
Ok by me Mark.
To any other new Missouri chapter folks that stop by here, always post up what you might need pieces and parts wise before buying. One of us is bound to have one, two or even three of what you might need. Some of us in the 73-79 dept are pretty "parts heavy"....some of us are REAL heavy on parts. lol
Alan (earthquake68) can always build a better one, than can be bought anyway. And is our local machinist/fabricator/body and paint guru. And Add Chip in the dept also.
RC has the old stuff, Chip and Dave are always parts sources too, and Jeff is a Ford truck parts scrounger just as much.
With good folks spread out all over MO, there is bound to be some OEM parts somewhere.
That also goes with rims&tires, lift kits maybe even a off brand part, just ask.
To any other new Missouri chapter folks that stop by here, always post up what you might need pieces and parts wise before buying. One of us is bound to have one, two or even three of what you might need. Some of us in the 73-79 dept are pretty "parts heavy"....some of us are REAL heavy on parts. lol
Alan (earthquake68) can always build a better one, than can be bought anyway. And is our local machinist/fabricator/body and paint guru. And Add Chip in the dept also.
RC has the old stuff, Chip and Dave are always parts sources too, and Jeff is a Ford truck parts scrounger just as much.
With good folks spread out all over MO, there is bound to be some OEM parts somewhere.
That also goes with rims&tires, lift kits maybe even a off brand part, just ask.
Alan is definitely "one of a kind."
Boon