Archived SoCal & Hi Buy/Sell/Trade Ads
#76
Wheels
I have a 57 Ford F100. Back wheels are Ford, the new front end is a Jaguar- fits Chevy wheels. Do you know if they will fit?
Let me know ASAP!
Thanks
#77
Here's some random ford stuff I have lying around that some people here may need. Some of it I've thrown on craigslist once or twice, but others have just been sitting here. Since we're all ford truck guys - maybe someone around here might have a use for this stuff.
Besides what's below - I've got a lot of random 73-79 parts lying around - so hit me up for what you need!
1st up - alcoa center caps for the 8 hole rims. They are for the type of rims in the pic below (fit 97 and older F-250s & 350s as well as the E series). I do NOT have the caps with a hole for the hubs - only the 2wd style. I have 4 in newish condition. They cost $95 ea. at the dealer - I am asking $25 each. I can get part numbers off of them if needed
2nd - Ranger "diesel" badges off the early 80's rangers
They have overspray on them and 1 is broken, but you can't tell it broke when it is mounted on the truck. $25 obo
3rd - sticker / trim for the 93-97 body style ranger. I believe it is the driver side. It's silver and purpleish if I remember correctly (took pics a long time ago). It came on a forrest green ranger if that narrows down what it could be at all. $5 obo
4th - pass side tail light off a 93-97 ranger. Will bolt into 93+ rangers. It has a small crap and has black spray on it (guy tried to "black it out"), but that will come off with some acetone. $5 obo
last is a custom made skidplate for F-150 or expedition. It came off my 2001 4x4 expedition, but will fit other years. It is completely BOLT ON in STOCK bolt locations. TIG welded and powder coated black with 1/4" 6061 aluminum. I sold the truck and no longer need it. $150 obo I can go less on price if I can keep the aluminum or put a thinner piece on there if you just want it for the "looks"
Besides what's below - I've got a lot of random 73-79 parts lying around - so hit me up for what you need!
1st up - alcoa center caps for the 8 hole rims. They are for the type of rims in the pic below (fit 97 and older F-250s & 350s as well as the E series). I do NOT have the caps with a hole for the hubs - only the 2wd style. I have 4 in newish condition. They cost $95 ea. at the dealer - I am asking $25 each. I can get part numbers off of them if needed
2nd - Ranger "diesel" badges off the early 80's rangers
They have overspray on them and 1 is broken, but you can't tell it broke when it is mounted on the truck. $25 obo
3rd - sticker / trim for the 93-97 body style ranger. I believe it is the driver side. It's silver and purpleish if I remember correctly (took pics a long time ago). It came on a forrest green ranger if that narrows down what it could be at all. $5 obo
4th - pass side tail light off a 93-97 ranger. Will bolt into 93+ rangers. It has a small crap and has black spray on it (guy tried to "black it out"), but that will come off with some acetone. $5 obo
last is a custom made skidplate for F-150 or expedition. It came off my 2001 4x4 expedition, but will fit other years. It is completely BOLT ON in STOCK bolt locations. TIG welded and powder coated black with 1/4" 6061 aluminum. I sold the truck and no longer need it. $150 obo I can go less on price if I can keep the aluminum or put a thinner piece on there if you just want it for the "looks"
#78
Hey everybody,
I need 5 of the cab clearance light covers. The factory Ford amber covers. I cannot find them for sale by themselves!
Let me know if you've got them and what condition they are in.
Thanks!
I need 5 of the cab clearance light covers. The factory Ford amber covers. I cannot find them for sale by themselves!
Let me know if you've got them and what condition they are in.
Thanks!
#80
Ford 9 inch locker
If anyone has a lightly used or new in box locker for a 9 inch either 32 or 35 spline, let me know. I also need a set of 32 or 35 spline 5 on 5.5 axle shafts for a stock length 73 truck 9 inch. Complete third members also welcome or a set of 4.56 gears or complete rear ends for that matter.
#81
Rebuilt e4od tran for sale
i have a professionally rebuilt E4OD from a 94 f-350. 257 miles on it before the 460 went kabluie. asking 900 o.b.o.
thanks for checkin the post.
socalflofam@***.net
thanks for checkin the post.
socalflofam@***.net
#83
04-08 F150 Stuff
I have a set of 20x8.5 Motto Wheels MT100; chrome. +30mm Offset, 6.0" Backspace. They are in great shape. Im lookin to get $900 for the wheels & tires.
Tires are 275/55/20 and will need to be replaced before too long.
---------------------------------------------------------------------------------------------------------------
I have an Eibach 2/3 drop & a belltech 2" drop scackle to complete the 2/5 drop. Im lookin to get $450.
The drop only has about 1000 miles on it, rides great. It is still installed, but ill be pulling it off in the next couple weeks.
In the pictures I am running 275/55/20 sized tires.
---------------------------------------------------------------------------------------------------------------
Im selling the factory steps off my 2005 F150 Screw. $200 Great condition They are not installed, I just dont have pics of them off the truck
Eddie
714-932-3114
Deluxf150@virtualford.org
Tires are 275/55/20 and will need to be replaced before too long.
---------------------------------------------------------------------------------------------------------------
I have an Eibach 2/3 drop & a belltech 2" drop scackle to complete the 2/5 drop. Im lookin to get $450.
The drop only has about 1000 miles on it, rides great. It is still installed, but ill be pulling it off in the next couple weeks.
In the pictures I am running 275/55/20 sized tires.
---------------------------------------------------------------------------------------------------------------
Im selling the factory steps off my 2005 F150 Screw. $200 Great condition They are not installed, I just dont have pics of them off the truck
Eddie
714-932-3114
Deluxf150@virtualford.org
#84
hi everyone new to the forum heres my dilema i just purchased a 77 f150 4x4 but they removed the transfercase to make it 2 wheel drive.what i need is the transfer case and what ever else i need to convert it back to 4x4 its an automatic shortbed..thanks hopefully i can be helped.
#85
well that all depends on what else is missing, the people who can really help you the best are here: 1973 - 1979 F-100 And Larger F-Series Trucks - Ford Truck Enthusiasts Forums start a new thread and they will be happy to help you.
#86
hi everyone new to the forum heres my dilema i just purchased a 77 f150 4x4 but they removed the transfercase to make it 2 wheel drive.what i need is the transfer case and what ever else i need to convert it back to 4x4 its an automatic shortbed..thanks hopefully i can be helped.
If you want his personal email you can PM or email me thought here.
#87
so this post i am sure will go bye bye but Steve you dont have your email set up with this forum, just an fyi.
#88
duh - my bad. Just PM me. It goes straight to my email, which I sit at all day long and hear when new ones come in. I respond QUICKLY. So quickly it often startles people.
Buyers on craigslist of ten go "I just hit send on that email - how are you already calling me back???"
Buyers on craigslist of ten go "I just hit send on that email - how are you already calling me back???"
#89
Looking for an Air compressor doesnt matter if it is working or not but looking really just for a good tank and maybe a pressure switch and gauges.... but the tank must be in good shape.