I have (qty) 4 16.5x9.75 Eagle Alloys 058's off of my '00 F250 (8 lug) that have been sitting shrunkwrapped in my basement for years. I ran these for about 2 years and got a great deal on a set of 17"s so I'm running those now. I keep telling myself that I'll get another set of tires to run for winter but don't have the funds for it. Will part for all 4 for $150 obo. They're in pretty good shape from what I remember. I can get pics posted if anyone's interested but in the meantime, here's the link to what they look like:

http://www.aewheel.com/eagle_alloy_wheels.cfm?id=23

 

Looking for an e4od for my 92 F150 5.0L any condition let me know please

 

I have a new set of 4 Pirelli Scorpion tires 265/75SR16, stock rims and center caps. These tires, rims and caps are new (take-offs) with less than 15 miles on them. I traded in my 2003 F350 for a 2007 F350 DRW and no longer need them. Will take a best offer over $400. You can email me at beagletim@aol.com if you are interested. Must be picked up in the Pocono Mountian, PA area.

 

hello everyone i am cleaning out some unneeded stuff that i have had laying around or swapped out while building my 76 F100 4x4. All parts are in great shape or near new condition. PRICES ARE MARKED OR BEST OFFER I NEED TO MAKE ROOM SO IT NEEDS TO GO. thanks for looking and if you need more info/ pics let me know. im listing these as pick-up only, im located in York Springs PA 17372. email is tifnbrian@yahoo .



1. NP435/Dana 21 combo from a 76 f100 4x4 that was bolted to a 360 (everything works as they should) $150.00

2. NP435 from a 78 f350 2wd that was bolted to a 351m (inside was cleaned and new gear oil put in but never used) $75.00

3. NP205 divorced model (unknown year, everything turns smooth) $75.00

4. 3spd with overdrive from a 86 f150 2wd that was bolted to a 302 (worked well when pulled from truck) $50.00

5. 4 tires and aluminum wheels 2 tires are mud kings and the other 2 are dakota with a little less than 1/2 tread. tire size is 33x12.5-16.5 and the wheels are the pre 96 8 lug style. $200.00

6. 2 brake drums, backing plates, and all brake parts. these are from a 76 E350 with a Dana 70 srw. all parts have less than 300 miles on (swaped out for disc brakes) $100.00

7. 76 F100 4x4 brake booster/master cylinder (about 4yrs old) $30.00

8. 76-79 F250/350 brake booster/master cylinder (bought new and was on truck for less than 3months) $50.00

9. 78-79 F150 4x4 tie rods (less than 3000miles on) $50.00

 

I am in the market for a set of 5 lug wheels for a 95 f150 4x4. Preferably Micky Thompsons but I welcome pictures of anything for sale. I am located in Washington PA just south of Pittsburgh.

 

It's cleanout time again:

1- rear window no defrost -$30

1- Engine Harness from a 1996 351W F350-perfect condition -$50

1-Accel 300+ Digital performance ignition with mutli strike, and complete Harness and mounting bracket. Part# 49326- $80

1- Speed Density Computer for 5.8L and E4OD- $50

1- Smog pump, Alt, tensioner still assembled on engine Bracket from '90 5.0L- $60

1- 95amp Alternator for '96 5.8L-used for 80 miles until I installed my 200amp from Ryan paid $120-sell for $90

1- Power steering-A/C bracket from '90 5.0L- $10

1- Thermactor piping assembly from 90 5.0L- $20

Any size Engine bolt you may need from my disassembled 5.0L - You pay shipping or free with pick up.

I can also offer quick welding service Fixes, I have stick 230amp and also Mig for all metals. I can't make things like Bumpers, or sliders as I don't have the time or source for materials for that but I can repair items if you can bring it to my home.

My needs are or will trade for:

Good washer/overfill reservoir for a 1990

I need a section of floor to repair my ride, it's the piece where the driver seat bolts to the upper floor section by the center consol, not the bottom pan. I will fab something if I have to. if you have a shell form a 1987-1996 and that piece is good I'll come and cut it out before you junk it!

Looking for a good CHEAP Hood for my 1990 Don't care about the paint job just no rust or holes.

Front interior trim that goes from pillars by windshield to door Both sides prefer grey or black.

Tailgate window weather stripping- front piece closest to outside.

Pm me or email Sliperhead@netzero.net I check every couple days.

thanks- bob

 

I need an intake manifold and headers for a 302. A 4bbl aluminum is what I really want. An early mustang one would be perfect. Headers need to be short and rear exit like the stock mustang ones or a set of stock mustang headers would be ideal. Thanks!

 

just wanted to say the tires are sold (thanks) and if anyone needs the other parts i have listed make me an offer. thanks again

 

Still looking for an E4Od for my 92 F150 4x4. I also still have a 78 Bronco 351M C-6 that I must get rid of. I am storing it at my parents house now and the landlord has decided to sell. I can not keep it at my apartment, so it must go!! Good clean title!! Willing to trade Bronco for E4od, throw me an offer!! I must get rid of the Bronco soon!!! It is located in East Fallowfield, Pa, near Coatesville/West Chester. My phone number is 484-886-7825, if no answer please leave a message and I will call you back!!

 

I had to get rid of the 07 F150, and get the wife a smaller ride, so I have an Edge Evo with dash pod (painted Tan to match 07 dash), all wires, box and books, only about 6 months old, asking $250. Also a Tekonsha P3 (90195) with factory F150 harness already wired to it, just plug it in under dash, incudes box and books $100. 2007 F150 XLT factory grille in perfect condition $150. And a Passengers side black plastic crew cab running board which was replaced buy my Ins. company, it has a light scuff on the edge of it which is barely noticeable $100 (new cost is $340each). I think it may have been bumped by a shopping cart. If interested in any of these items please shoot me an e-mail. I will be glad to e-mail pics of anything you would like to see. You can see some pics of the Evo in my gallery F150. I also have a set of trailer tow mirrors which slide on over the factory mirrors of the F150. These fit the larger mirrors that are on the XLT's and Lariats, Perfect condition only used once, they work very well.

e-mail jimmyb21@comcast.net

 

120,000 miles, looks good, runs good, white, all stock except for bigger exhaust. Lariat edition. Tailgate has some dents from mishaps with the boat trailer but not bad, and drivers seat has a small split in the seam. If interested I will send pics. Need to sell because I bought a tool truck and tool route. I need to get rid of the big expensive toys (truck and boat) but keeping the old cheap projects. Open for interesting older Ford projects plus cash. I'm looking for around $18,000 OBO or trade.

Mooney in PA
Dillsburg, PA
hmooney@mooneysusa.com
1964 Econoline 4 Door Panel van
1965 Econoline 5 Window Pickup
Looking for:
61-67 Econoline/Falcon window Van
64 Ford Galaxie Country Sedan or Squire (station wagon)
and any interesting Ford

 

I got a rear chrome step bumper in exc shape from my 91 F250. Only the bumper, no pads or brackets. just about perfect shape. Im asking 75.00

 

A "friend" has a 90 F250 4dr 4wd 351 stick that is decent that he is parting out. Let me know if anyone needs and I will relay msg to him. He is a C---y nut so he wants it out of his yard quick.

 

I have a REAL nice chrome factory step bumper from my 91 F250. It is the kind that has top and front pads, but they are not on it. I'm asking $100.00 or best offer.

 

Hi all, I have a few things for sale.

Front clip from a 78 F100.No rust,straight,race track chrome $275 OBO
Carbed 300 6 cylinder.Runs strong, no smoke or noises, not sure of mileage $125
C6 from a smallblock 2WD F350.Works fine $50
C6 from a 460 2WD F250.Works fine.$50

Thanks for looking