I need to have a high angle driveline built which wouldn't be a big deal but it turns out that my B/W 1345 transfer case is an issue. The existing front yoke is supposedly somewhat rare and the only way I can get the driveline built is to come up with 32 spline CV style yoke that was available for the 1345 Tcase. I am told it was in the 4 wdrive 88 F250 and no doubt in many other years but right now I am only sure of that year. So how about it? Anyone have a source or a better idea?

 

Wasn't the bw 1345 the mini truck t case? The bw 1356 was the fullsized case. I'm no help on the yoke issue though.

 

BW1350 was the ranger case IIRC

F250s should have a 1356 like Andrew said

 

I stand corrected. Simple newb searching found that BW1345s were found in 80-86 Fseries trucks and broncos.

That would IMHO mean your yoke cant be too terribly rare and should be pretty easy to find at a scrapper or maybe ebay

 

x2 on the being corrected. That's alot of trucks with them, odds are good to find one at a junk yard.

 

rangers had the 1350 till 90 i believe as a manual sometime late 80s maybe 87 they switched to the electric. then the 1354 came out in 90 and was aviable as a manual untill 95 i think. then the 1354 electric was avaiable from 90 im pretty sure to now. im pretty sure they still use that one.

 

my 95 had a 1356

 

was it a ranger??? thats what i was talkin about. the 1356 was a full size case after 86 im prettty sure. avialiable in both manual and electric.