How to install a side window?
Post Fiend
Joined: Jan 2006
Posts: 5,037
Likes: 9
From: Kasson, Minnesota
You have to unbolt the regulator to be able to drop down the window inside the door. You may have to unbolt the channel from the rear side of the door (you'll see two bolts). Pop out your anti-rattlers (felts) from the door. Turn the window sideways in the door and pull it out. Then reinstall the new one same way. I think that's about it.
This may help you out a bit.
http://www.autozone.com/az/cds/en_us...rInfoPages.htm
This may help you out a bit.
http://www.autozone.com/az/cds/en_us...rInfoPages.htm
Posting Guru
Joined: Sep 2003
Posts: 1,192
Likes: 1
From: lino lakes, mn
Remove the door panel, the front window track is attached to trhe wing window frame remove the phillips screws in the front of the door post then the bolts that hold the wing window frame wiggle the whole wing window assembly out now, grab the side window and side it out of the bottom troff and out the top you may have to remove the rubber seals at the base of the window opening.Replace in reverse order.
