mud run in Lamoni July 28th
#1
mud run in Lamoni July 28th
This will be a saterday night race sign in at 6 racing starts at 7pm. They are adding a modified class to go along with the stock, superstock, modified stock, and outlaw classes.
These guys are really trying to build up this track so I sure hope some more Ford guys can show up for this and make a showing. Last time was pretty decent track but they were finding out a lot of guys couldn't make the friday night stuff.
These guys are really trying to build up this track so I sure hope some more Ford guys can show up for this and make a showing. Last time was pretty decent track but they were finding out a lot of guys couldn't make the friday night stuff.
#2
#3
They don't have a web site and this track was recently taken over by a new manager so the rules are a little in flux right now (me and a couple other guys have been working on getting the new management to establish some good classes etc adn getting better)
Basically they are pretty simple and for the most part are tire size based, IE stock class no bigger than 33", superstock is 35" modified stock is 36" adn allows any exhaust system, modified any tire size DOT approved only cut tires ok, no nitrous. outlaw well no rules basically. If you ahve a specific question ask away and if I dont' know I can call and ask about it for you.
Basically they are pretty simple and for the most part are tire size based, IE stock class no bigger than 33", superstock is 35" modified stock is 36" adn allows any exhaust system, modified any tire size DOT approved only cut tires ok, no nitrous. outlaw well no rules basically. If you ahve a specific question ask away and if I dont' know I can call and ask about it for you.
#4
Well I will give you a quick run down of what I have ( which is stock class here ).
dual plane intake
4v carb
cast heads
stock ignition
headers with straight pipes - do have 12" muffs to put on if needed
4" lift
35" tires but measure 34" just makes stock here
17" of vacuum @ 1000RPM
So just by tire size it looks like I would be in superstock. I dont know about your SS but here my truck is under powered for that class BAD!!!
dual plane intake
4v carb
cast heads
stock ignition
headers with straight pipes - do have 12" muffs to put on if needed
4" lift
35" tires but measure 34" just makes stock here
17" of vacuum @ 1000RPM
So just by tire size it looks like I would be in superstock. I dont know about your SS but here my truck is under powered for that class BAD!!!
#5
Here are a coulpe vidio clips of last weeks runs. Note: this is stock class.
This was in Auburn Ne.
http://www.youtube.com/watch?v=NcjRblo6QtI
http://www.youtube.com/watch?v=AWto2X215HA
This was in Auburn Ne.
http://www.youtube.com/watch?v=NcjRblo6QtI
http://www.youtube.com/watch?v=AWto2X215HA
#6
yeah you will be in superstock class I would say and it's not too bad of a class to be in although some fo the missouri trucks that come up are pretty hot in that class. But hey come over anyway and run. Then I can talk to you and meet someone else off here plus want to discuss pacific junction too.
#7
Trending Topics
#8
Thread
Thread Starter
Forum
Replies
Last Post
Troublemaker427
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
21
05-08-2014 01:42 PM
Troublemaker427
1957 - 1960 F100 & Larger F-Series Trucks
4
04-22-2014 08:01 PM
Kirbys73F100
Georgia Chapter
3
08-23-2012 12:45 AM
SYKOLINCOLN
Flatbed, Car, Boat, Utility, Horse & Misc. Trailer Towing
7
10-03-2007 09:26 PM