I have a 96 F350 PSD. It has started shutting off at times. (No Pattern) When it does I can turn the ignitions off and back on and it will start back up. It may run the rest of the day or it may shut off again. Any and all advice welcome. Thanks Jim

 

I would replace the cam position sensor, its located behind the lower left serpentine belt. you can get them for about 30 bucks on ebay. Jcab

 

Classic Cam sensor symptoms. Their only about 25 bucks and 10 minutes of your time.

 

Thanks for the info. I replaced the CPS today seems to be working so far. Thanks again.

 

good to keep one in your glovebox or toolbox.