Help! I've got the door panel off, BUT...
Thread Starter
|
Elder User
Joined: Jan 2007
Posts: 759
Likes: 0
Help! I've got the door panel off, BUT...
Nevermind. I looked harder and found it.I took the door panel off to fix my power dorr locks but I can't figure out how to remove the actuator. I did a couple of searches but didn't find any info. Is it the three torx srews on the door near the latch?? Thanks
Last edited by tracyclifton; Mar 8, 2007 at 12:37 PM.
Senior User
Joined: Mar 2005
Posts: 112
Likes: 2
Yes. In addition, I found it easier to remove the outer handle as well (2 x 10mm nuts inside door). this gave me easier access to the rod from the handle to the latch assembly (which you must remove to get the actuator out).
Thread Starter
|
Elder User
Joined: Jan 2007
Posts: 759
Likes: 0
Originally Posted by davhut
Yes. In addition, I found it easier to remove the outer handle as well (2 x 10mm nuts inside door). this gave me easier access to the rod from the handle to the latch assembly (which you must remove to get the actuator out).
