motor swap
Thread Starter
|
Junior User
Joined: Nov 2002
Posts: 78
Likes: 0
From: Mckerrow
motor swap
I just got an 86 f150 with a 302 with almost 300,oookm and i have a straight 6 qith 90k, will the straight 6 bolt up to my 302 tranny? if it will how hard is it to switch them?
Any advice appreciated.
richard
Any advice appreciated.
richard
Cargo Master
Joined: Aug 2003
Posts: 3,237
Likes: 3
From: Belleville, Ontario
Easy Inspection.
The bell housing bolt pattern should be the same. Compare the converters to make sure they are the same height and go in the pump to the same depth. Look over the flex plates to estimate their profile (how far forward or back the mounted converter will sit) to insure proper installed depth into the pump.
AL.
AL.
Thread
Thread Starter
Forum
Replies
Last Post
