???license plate on 47 pickup ???
#1
#2
???license plate on 47 pickup ???
It all depends on what state the truck was registered in. Ford didn't control the plate requirements, the states did. The front bracket is a 42-47 truck specific bracket, and is not available in reproduction. They don't seem too easy to find, maybe since most states at the time didn't require a front plate. I have one of these fairly rare brackets, came with one of my '46 pickups. The bracket attaches on one of the bolts tha hold the bumper to the bumper arms. The rear plate is attached to the 2 screws the hold the tail light to the bracket coming off the stake pocket on the bed. They are generally mounted on the driver side light, under the special tail light that had a lens in the bottom of it so the plate could be illuminated in the dark. The rear plate bracket is available in reproduction form, from just about any old ford supplier. I believe it's the same from 28-56 for trucks.
Gary
==============================
1946 pickup-ongoing project
1947 pickup-waiting for resto.
1957 Ford FL 500 Town Victoria
1970 Mustang FB-daily driver
selling my '88 B2 2.9/AT 2WD
Gary
==============================
1946 pickup-ongoing project
1947 pickup-waiting for resto.
1957 Ford FL 500 Town Victoria
1970 Mustang FB-daily driver
selling my '88 B2 2.9/AT 2WD
Thread
Thread Starter
Forum
Replies
Last Post
evil
1948 - 1956 F1, F100 & Larger F-Series Trucks
3
06-25-2002 06:37 AM