power steering conversion w/ toyota sector
#16
power steering conversion w/ toyota sector
I did the toyota stering conversion paid $75 for a used box.Had to remove it myself.Made the bracket.For a stering joint I welded part of the toyota rag joint to a ford rag joint to mate to a ford tilt collum.And welded the ford and toyota pitman arms together as this was before you could buy a pitman arm.Had around $150 in the whole thing.
larry
larry
Thread
Thread Starter
Forum
Replies
Last Post
tyminski
Clutch, Transmission, Differential, Axle & Transfer Case
5
05-05-2002 05:14 PM
tyminski
Clutch, Transmission, Differential, Axle & Transfer Case
4
11-03-2001 01:36 PM