hello,
i was wondering if anyone had a set of factory 3/4 ton wheels, the aluminum 10 hole style ones, like what came on certain 1995ish f-250s? looking for a set for a decent price, i suppose i could swing shipping if the price was right. I don't need the center caps,but that could be a bonus.... let me know...

thank you,
Lee

 

Lookin to sell a 1979 f150 4x4. 400, c6, posi 9in rear. Truck runs and drives but is not street legal due to no exhaust and the brake lights are not hooked up. Body decent except for the box. Looking to get $900 or best offer.

33x14.5x15 mickey thompson baja belteds on 15x10 prime wheels

complete wiring harness, grille, disc brake spindles, power steering setup, and tan interior from a 76 f150

2 460 engines. One set of truck 460 towers.

1 360fe and c6 transmission.

make offers on the parts.

Moses

 

i have a new never used lunati cam for a 460. i believe its number is 00096.its a braket master cam good smooth idle. $50.just the cam no lifters.also have a never been used stock cam for a 429

 

All the parts are still here...I am in Southeastern Iowa close to Iowa City. The roadrunners however...are no longer for sale...not that any of the smart FORD drivers on here care. All the parts are in my garage, out of the elements. Any other needed info just email or private message me.

 

Sad to say it, but some toys have got to go.

2003 F250 Lariat FX4 6.0 Diesel: 2" leveling kit 27,000 miles, automatic, Husky Floor Liners, This truck has maintained under the severe maintainence program but driven only on the highway. Beautiful truck. $32,900 / obo. Pic in my gallery or will email other angles.

1997 JEEP Wrangler Sport: Been parked for the whole year I owned the F250. Time for this one to go, going to get more economical luxury car for commuting. 4" lift, 33" tires, Custom alloy wheels, Banks Header, Alarm with keyless entry & motion sensor, Tinited Best Top Soft Top only 3 years old. 87,000 miles, Pioneer CD, Sound Bar with lights, $9500 / obo

2001 24' Salem Lite Travel Trailer: Used 15 times. Only taken on 600 mile or fewer trips. Equalizer hitch, has a hitch installed at rear of trailer to tow doubles - with 4 wire light hookup. Sleeps 6, 15,000 BTU A/C, Microwave, Oven, three burner range, wired for satellite TV, 10,900 / obo

Please email or PM for more info or to set up time to come see them.

roozter@hotmail.com

 

I beg everyone's pardon. I searched for for sale and posted under here without realizing it was under the Iowa chapter.

I am in Utah so it should not have gone here.

Sorry!

 

Looking for a diesel motor mount plate, specifically for 92, but from 83-4 up to 94 will work. Passenger side only, I have the driver's side. Goes between the motor mount rubber and the frame.
Have 2 460 motor mount towers for 92, should work from 80-96. Also 460 motor, 227,000 original miles, smokes when revving, be best as a rebuilder. Also have the 5 speed with it.

 

Click on classifieds, that is the best place to post that way. Your local chapter may have a for sale thread as well.

 

Here it is if you are interested.

1970 f250
new 390 bored .060 over. 312 miles on rebuild
4 barrel holly 650 dbl pumper, freshly completly rebuilt and cleaned
new last year dual exhaust and mufflers 2 1/2 inch front to back
new tires last spring on 8 bolt alum rims 16 inch
new king pins installed last spring
new dizzy, alternator, water pump, power steering pump, fuel pump, power steering gearbox
decent bench seat, solid rear glass
air horns
am/fm cass stereo
white face gauges
engine re wired
chrome breather, valve covers
all lights rewired and working okay front and rear
steel push bumper ( home made )
Galvanized inner fenders
battery relocated to side box
engine is clean enough to eat off of
no leaks whatsoever from engine
C-6 auto trans ( front seal leaks )
dana 60 rear end 3.73 gears
repair manual and shop manual includes complete wiring diagrams for all 67-72 trucks
includes many spare parts ( water pump, dizzy, pentroics ign, wiring, carbs etc etc)
tool bed box , with lots of goodies and some junk.
good spare tire and rim
handyman jack included

invested tons - engine rebuild $1200, trans $200, carb rebuild $70, misc small parts $300, tires & rims $300, new exhaust $350, misc engine parts $350, chrome $100, wiring , fuel lines new everything else on engine $250
many parts from fellro $260
this that and the other thing $300

roger knows my truck and has seen it recently, so if you have the need for a 2nd opinion i am sure he can speak a few words. i even put new wire looms over all the engine wiring last week. I have to sell this because i need the cash to focus on other areas of my life right now. So i offering everything to the highest bidder but i will sell it to the first person who will pay me $850 bucks for it. Hell i will even deliver it on a warm day if you will pay for the gas and help me get my motercycle out of the back of it so i can ride it home.

$850 cash and it is yours

 

by the way my phone number is 319. 209 . 1185 or 319 . 752. 0508 in case you have any questions, i have also updated the photos in my gallery to reflect what the truck looks like today

 

Been thinking about selling my 69. Two ways to describe it - both true. It's pretty much an old piece of $%^& and it will always start and get you there if you don't mind comfort/luxury. 240 / NP tranny with granny low, good rear, extra inner/outer fenders. $400.

 

need a maroon bench seat for a 88, set of shackls and hangers for a 89. wanna find a reciever hitch for the 89. need good oil pump for 88 302, if anyones got a new one that there not using.still lookin for a tranny for my saturn sl1 sohc 1.9 1999.

 

Somebody wanted a spare tire hanger for a late 80's truck. Couldn't find the thread, but I was planning on taking the one off my 87 this weekend. Free form Davenport.

 

thanks sam, that was me, but the day i picked up the truck, the p o told me he threw the spare tire carrier in the back, so i guess im gonna use that one. thanks though

 

Got an 88 Bronco with 38.5 swampers, 5.0, AOD, sweet-*** wheels, new headers, - needs exhaust, and in my opinion, lower gears(has 3.50 now) and possibly bigger axles. Have a dana 70 and some 5.13 gears that will go with it if you so desire.$2500 OBO/ trade

4 wheel steer mud racer- Dana 70's geared 5.89, c-6 with TCI street fighter converter , BW1345 t-case, 38 inch rice type tractor tires, setup for small block ford- $3500 minus engine- won LOTS of trophies locally


79 Bronco- Rusty but useable, fresh 400 engine, .030 over, forged TRW pistons in stock configuration, ARP rod bolts, balanced, aussie heads with all new valvetrain including stainless steel valves, Comp 268 cam. fresh C-6 with 3000 stall B&M converter and shift kit, fresh brakes with larger calipers and rear wheel cylinders, fresh Rancho shocks, 4.10 gears with full spool in rear. This truck was raced locally by my dad in the street stock class and everything on it was only ran this last summer and only in the mud. We decided to build a stock early Bronco for him for this next year. Truck also has 31 inch swampers on it with aluminum rims that may or may not go with it as we are debating on some other tire options. $2500

31-10.50-15 Mickey Thompson Radial Baja Claws with every other lug removed- only raced about 4 or 5 times-$550