Does anyone know the bed height diffirence between the 450 and the 350. I am referring to the top of the bed rails on both in 2wd if possible if not 4wd will do. I know on the old 450 when they would put a normal pickup bed on it, unless it was cut down they were always to high to pull a fifth wheel trailer with enough clearance between the bed rails and trailer. Alot of people would leave the trailer nose high which is not really a fix to the problem it just dumps all the weight on the back axle.

 

well one of the main advertising points is able to pull a 24k lb fifth wheel. I would suspect whatever the problem with height in the past may have been, it has been resolved. That is the 450 4wd that they have been promoting fyi.