1947 and older trucks Roll call! What do have and what are your plans!!
#212
Yes, she was sitting for a number of years in a barn in NC, and not running when I bought her. had her towed back to GA, where I and another mechanic worked on the distributor and wiring. Starts and runs fine...I want to keep the truck looking "salty" but with a beautiful running engine. Redo the bed, add a tailgate, and that's it.
#213
#215
1947 798T Flathead V8, 4 Speed Trans, 2 Speed Rearend
Loreauville, LA. Bought at auction 3 years ago in Ohio. Estimated 35,000 miles. Came with stake sides & grain (solid) sides...it dumps! It was shop kept but has been sitting out since I bought it...didn’t have the shop space for it. Finally rebuilt carb, replaced fuel pump, rewired & converted to 12v, added electronic ignition, electric wipers, replaced Master and all wheel cylinders, added pusher electric fan (just in case during parades), sanded & resealed the bed & stakes, replaced headliner & gave her a wax. Need to drop PTO & repair/replace a gear. Plan on running it as.
Getting unloaded from Ohio.
On the farm
Moved to a friend’s shop to start work
Electric wipers
Alternator & Electronic Ignition
Gage cluster rebuilt
Loreauville Mardi Gras Parade
Home, Sweet Home!
Getting unloaded from Ohio.
On the farm
Moved to a friend’s shop to start work
Electric wipers
Alternator & Electronic Ignition
Gage cluster rebuilt
Loreauville Mardi Gras Parade
Home, Sweet Home!
#217
#218
#219
#220
1935 Ford Model 51 1-1/2 ton stakebed
I found this beauty a few years ago, not running and in great shape.
I rebuilt the distributor and the generator, and replaced the starter and engine area wiring. I rebuilt the heads and replaced the carburetor.
I rebuilt the fuel system. The engine has been painted with original Ford green. I rebuilt the radiator, and replaced all the hoses. The engine bay is real pretty.
I replaced the clutch, and am in the process of replacing the brakes.
I replaced the wood stakebed with a 10' custom built metal one. I added a tigerwood bed with stainless steel slats.
It is all original, except for the stakebed.
The body is exceptional, but needs paint.
It runs and drives.
It is for sale, PM me for any details or questions.
It is for sale. Make me an offer.
I rebuilt the distributor and the generator, and replaced the starter and engine area wiring. I rebuilt the heads and replaced the carburetor.
I rebuilt the fuel system. The engine has been painted with original Ford green. I rebuilt the radiator, and replaced all the hoses. The engine bay is real pretty.
I replaced the clutch, and am in the process of replacing the brakes.
I replaced the wood stakebed with a 10' custom built metal one. I added a tigerwood bed with stainless steel slats.
It is all original, except for the stakebed.
The body is exceptional, but needs paint.
It runs and drives.
It is for sale, PM me for any details or questions.
It is for sale. Make me an offer.
Thread
Thread Starter
Forum
Replies
Last Post
1998Ranger25L153CID
1983 - 2012 Ranger & B-Series
2
10-21-2014 06:52 AM
48fordjeffie
1948 - 1956 F1, F100 & Larger F-Series Trucks
11
01-15-2009 06:30 PM
76shortie
1973 - 1979 F-100 & Larger F-Series Trucks
7
12-28-2006 12:44 PM