Does any one have any tech drawings of the mustang ifs? I am trying to build my own crossmember and need some help with the mesurments. The lower control anm bolt hole is my main concern right now.

 

Angus

try this link


http://www.jalopyjournal.com/TJJ/benchrodding.htm

if it doesn't get you there...click on the HAMB link at the bottom of the page... when you get to the HAMB board, look down toward the bottom of the page for the "HOP TO" option box...or it might be a pull down box that says 'visit one of our archives'.. scroll down in the box and choose Tech-o-matic and go... there is an excellent article there on howto build your own MII crossmember... good teck stuff...

john

 

Angus...

here's a better link directly to the article...
sorry, sometimes I'm braindead and don't remember how to do things..

hope this helps

john


http://www.jalopyjournal.com/ubb/Archives/Archive-000001/HTML/20020908-1-021511.html

 

 

Thanks for the link. It is just what I was looking for.
It is A very good article