I have already searched this question... Anyone know if the military HUMVEE 16.5" wheels fit our superduties? I am concerned about the backspacing.

 

I believe they are totataly different bolt patterns. So I would have to say no, and the backspacing would be to deep.

 

My guess is that they are a GM bolt pattern or a totally one-off pattern made for the H1's

 

your guess's are correct! Former USMC humvee mechanic here, they are a GM 8 on 6.5 bolt pattern w/ a 6" back spacking i belive ( i might be alittle off on that but it's close or alittle more)!! our SD's are 8 on 170mm.

Jason
Team Mudd Pres.
415cid, 6.5" lift, 39.5's, YEA that's right 39.5's!

 

Thanks guys! So much with trying to set up a runflat system... If I cannot find my Michelin XZLs I might go with a 16.5" wheel and pickup military 36"-37" HUMVEE tires. As far as the 80 on 170mm it is about 1/4" off from the 8 on 61/2.

 

I almost had them on my 1977 Highboy.......the 7" backspace was too much!! Buy some 16.5 Procomp Rockcrawlers, and do them up.