O-rings - Preventative Maintenance Interval?
Thread Starter
|
Senior User
Joined: Jan 2004
Posts: 205
Likes: 1
From: Houston, TX
O-rings - Preventative Maintenance Interval?
I've got ~130k on my rig and I'm starting to get a little paranoid about the o-rings that I see mentioned in a lot of posts. Namely: 1) turbo pedestal, 2) fuel bowl, 3) hpop.
Questions:
- did I miss any?
- what mileage intervals have you guys seen these seals fail at?
Just wonderin' if I should try to knock them all out or if I should wait. No oil leaks yet, knock wood
Craig
Questions:
- did I miss any?
- what mileage intervals have you guys seen these seals fail at?
Just wonderin' if I should try to knock them all out or if I should wait. No oil leaks yet, knock wood
Craig
Post Fiend
Joined: Jul 2005
Posts: 14,582
Likes: 12
From: 21791
if you are paranoid about it, then i would recommend buying them and keeping them on the shelf or in the toolbox so if you do happen to have a leak, you have the stuff you need right there. then come here, search for two minutes and find out how to do it. however buying the parts you need "in case" of a leak usually means you will never have one. 
