460 engine disasembly?
Thread Starter
|
Senior User
Joined: Nov 2004
Posts: 157
Likes: 0
460 engine disasembly?
i got a 460 from a salvage yard and im pulling it apart and this the the first ford motor that im going to rebild and i am woundering what to look for during disasembly to know if it is rebuildable? where can i find the block casting numbers? the valve covers say 460 out of a 76 ford truck and the heads are d3ve a2 i belive i will check my in formation later today. and any tips would be grately aprecated thanx.
Thread Starter
|
Senior User
Joined: Nov 2004
Posts: 157
Likes: 0
i found the block casting and its dive-6015-a2b
and the casting # for the heads are d3ve-a2a
what is this i good block casting? and are the heads good casting #?
the engine will have a comp cam xtream 4x4 210/218 kit with the springs and every thing, also headers if i can find a good set of fenderwell exit headers, edelbrock preformer 460 intake and a ebelbrock 750 cfm with vacum secondarys. what will the tq and hp specs be? and about how good will my mpgs be?
also what flywheel do i need for a manual transmission?
my last question is how do u set the rocker arms on a pedistal mount or are they all the same?
and the casting # for the heads are d3ve-a2a
what is this i good block casting? and are the heads good casting #?
the engine will have a comp cam xtream 4x4 210/218 kit with the springs and every thing, also headers if i can find a good set of fenderwell exit headers, edelbrock preformer 460 intake and a ebelbrock 750 cfm with vacum secondarys. what will the tq and hp specs be? and about how good will my mpgs be?
also what flywheel do i need for a manual transmission?
my last question is how do u set the rocker arms on a pedistal mount or are they all the same?
Last edited by theguy_88; Mar 7, 2006 at 08:23 PM.
Logistics Pro
Joined: Feb 2000
Posts: 3,565
Likes: 9
From: Sun River St. George
D1VE is a common block and your D3 heads are 97cc chambers. During disassembly, keep everything including all the old gaskets. These may be useful later for reference. Wash and clean everything and spray WD-40 on all metal parts to keep the rust off. Don't force the pistons out of their bores. A ridge has built up at the top of the cylinder and sometimes the rings will catch there and keep the piston from coming out. The machine shop will remove this ridge and hone the cylinders to the proper size. What does your budget look like? What type vehicle will you use this engine in. The rockers are the pedstle type and roller rockers are available for D3's. But unless you are building a race or pulling engine you do not need these now and you can always add these typr parts later. Building a race engine will cost upwards of 4K. A overhaul with quality parts will cost around 3K.
Senior User
Joined: Jan 2006
Posts: 195
Likes: 0
From: upstate N Y
L&L is a very good source for your headers .You need a 1978 or earlier flywheel for your engine the balance changed in 1978/79. Your engine is internally balanced.Make sure you are not sold a 351M/400 flywheel either or you will be building a shaker.
Elder User
Joined: Jul 1999
Posts: 877
Likes: 2
From: Missouri
Get a 360/390 flywheel or buy an aftermarket steel 429/460 flywheel of ebay. There are no 1978 or earlier flywheels except the ones that came on four speed cars in the late 60's to early 70's that had CJ's and SCJ's and they are hard to find.
BTW a 351/400 flywheel won't even bolt up to a 429/460 crankshaft.
BTW a 351/400 flywheel won't even bolt up to a 429/460 crankshaft.
Senior User
Joined: Jan 2006
Posts: 195
Likes: 0
From: upstate N Y
"BTW a 351/400 flywheel won't even bolt up to a 429/460 crankshaft."
Better go out and try that a 351m/400 flywheel will bolt onto a 429/460 but it wont balance it .That is a common mistake that people make when swapping 351n/400 for a 429/460 the flywheel/flexplate bolts right on .
Better go out and try that a 351m/400 flywheel will bolt onto a 429/460 but it wont balance it .That is a common mistake that people make when swapping 351n/400 for a 429/460 the flywheel/flexplate bolts right on .
Elder User
Joined: Jul 1999
Posts: 877
Likes: 2
From: Missouri
Well I went out and tried it and guess what. The 351m/400 flexplate would not go onto the 460 crankshaft. The center hub diameter of the 460 flywheel is about 2.490(used cheap calipers)and the 400 hub is 1.750. Then the bolt holes on the 460 measure about 4.225 across center to center and the 400 measures 3.000.
The common mistake is using a late model ex.balance flywheel on an internal balance motor. A 360/390 flywheel will bolt right on and is internally balanced.
The common mistake is using a late model ex.balance flywheel on an internal balance motor. A 360/390 flywheel will bolt right on and is internally balanced.
Trending Topics
Senior User
Joined: Dec 2003
Posts: 202
Likes: 0
From: Tyler Co., West Virginia
Sorry for the hijack guys, can anyone put a part number on here from advanced auto, auto zone, or napa for a 390 flywheel? The reason im asking is so I get the one with the correct tooth count. Also, isnt it a 302 bushing or bearing, or does it matter? Thanks a buch, Dave.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Top 10 Ford Trucks Coming to Mecum Indy 2026
Brett Foote
5 Best / 5 Worst Ford Truck Wheels of All Time
Joe Kucinski
Senior User
Joined: Jan 2006
Posts: 195
Likes: 0
From: upstate N Y
O.K. my bad I'm wrong
Sorry greenhighboy I took apart a '78 150 with a 460 and a NP435 stick everything else was factory except the 460 .It must have had a FE flywheel.I also went by the book How to Rebuild FORD V8 Engines by Tom Monroe which says
"Therefore ,you can't install a 429 flywheel on a 400 and expect it to be balanced,even though the flywheel will fit both engines.The engine will not be in balance.Vice-verce,a 400 flywheel will put a 429 out of balance."
Sorry Mom always said "you can believe everything you read" guess she was right. I never listened to Mom real well.Have scars to prove it.Well my bad, force me to do 3 laps of the FTE yard in a Camaro.And I will say 10 Hail Henrys tonite.
"Therefore ,you can't install a 429 flywheel on a 400 and expect it to be balanced,even though the flywheel will fit both engines.The engine will not be in balance.Vice-verce,a 400 flywheel will put a 429 out of balance."
Sorry Mom always said "you can believe everything you read" guess she was right. I never listened to Mom real well.Have scars to prove it.Well my bad, force me to do 3 laps of the FTE yard in a Camaro.And I will say 10 Hail Henrys tonite.
Last edited by eedvark; Mar 12, 2006 at 03:43 AM. Reason: miss spellings
Elder User
Joined: Jul 1999
Posts: 877
Likes: 2
From: Missouri
That book has quite abit of mis information in it including casting numbers. However it is a very good source for rebuilding an engine because it goes step by step and has alot of good pictures.
Mudder, I think the tooth count is 184. I have one and can count to be sure.
Mudder, I think the tooth count is 184. I have one and can count to be sure.
Hotshot
Joined: Dec 2003
Posts: 18,423
Likes: 9
From: iowa
greenhighboy is right I wouldn't trust anything out of the book and if he told me Ford built the 429 engine I would start to suspect that chev actually makes it and painted it blue. I wish people would quit looking at that book, cause it then takes hours to convince people that most of what is published in it is BS
Thread
Thread Starter
Forum
Replies
Last Post
supercabfreak
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
36
Nov 26, 2011 07:07 PM
maldonadom10
1973 - 1979 F-100 & Larger F-Series Trucks
6
Sep 17, 2009 09:46 PM
