problems with u-joint removal
Thread Starter
|
Senior User
Joined: Sep 2005
Posts: 237
Likes: 0
From: mankato, MN
problems with u-joint removal
I'm trying to remove the u-joint between my drive shaft and rear pumpkin. I am unable to remove it from the drive shaft. It looks like it has been rusted in place. I removed the outer clips but cannot get it out. DOes anyone have any tricks or techniques to remove these.
country
country
Cargo Master
Joined: Jun 2003
Posts: 2,982
Likes: 7
From: Somewhere Saskatchewan
Use a socket large enough to fit over one cup and a smaller one to fit inside the cup retainer.
Place everything in a vise and push it out.
You may have to smack it with a hammer to get it's attention.
Place everything in a vise and push it out.
You may have to smack it with a hammer to get it's attention.
