I got a Question?

Reply Subscribe

Thread Tools

Search this Thread

Dec 19, 2005 | 07:30 PM

77F-150

Thread Starter

Senior User

Joined: Feb 2005

Posts: 185

Likes: 0

From: South Dakota

I got a Question?

I have dual tanks and my truck is fuel injected and i have the hose that was going to the tank behind my seat moved to the tank in the back and everything seems to work but i dont know which switch goes to the back for the gas gauge to work, theres the Aux and Main...i had it on the main when i was using the tank behind my seat. Do i use the Aux for the rear main tank?

Dec 20, 2005 | 11:43 AM

77F-150

Thread Starter

Senior User

Joined: Feb 2005

Posts: 185

Likes: 0

From: South Dakota

?????????????????????????????????????????????????? ???????????????????

Dec 20, 2005 | 12:04 PM

LxMan1

Moderator

Joined: Dec 2001

Posts: 22,436

Likes: 17

From: Louisville,Ky.

I would assume so if you didn't change any of the wiring to the sending units.

Dec 20, 2005 | 03:26 PM

77F-150

Thread Starter

Senior User

Joined: Feb 2005

Posts: 185

Likes: 0

From: South Dakota

Hummm i would assume as well cause im not getting any reading from either the aux or the main, i would probably have to strip out the harness and replace it with another.

Thanks