PSD Code Problem
Thread Starter
|
New User
Joined: Dec 2005
Posts: 7
Likes: 0
PSD Code Problem
Have 02 PSD and when i use the windshield washer fluid button my truck stalls
and throws code P1281. Any help about this matter would be appreciated. Also i have the edge w/attitude if that matters
and throws code P1281. Any help about this matter would be appreciated. Also i have the edge w/attitude if that matters
FTE Leadership Emeritus
Joined: May 2001
Posts: 13,653
Likes: 6
From: Cabot, Arkansas
Welcome to Ford Truck Enthusiasts deanroller.
DTC P1281 indicates injector control pressure circuit out of range high during KOEO Self Test or during continuous diagnostic monitoring.
Possible causes: Biased ICP sensor/PCM. ICP circuit shorted to VREF.
Given that you are obviously dealing with a short I would start by looking for pinched wires/harness in and around the steering column.
DTC P1281 indicates injector control pressure circuit out of range high during KOEO Self Test or during continuous diagnostic monitoring.
Possible causes: Biased ICP sensor/PCM. ICP circuit shorted to VREF.
Given that you are obviously dealing with a short I would start by looking for pinched wires/harness in and around the steering column.
Thread
Thread Starter
Forum
Replies
Last Post
AliceSML79
1968-Present E-Series Van/Cutaway/Chassis
1
Mar 6, 2016 11:00 PM
dustys7.3psd
1999 - 2003 7.3L Power Stroke Diesel
23
Jul 21, 2009 07:49 AM
bloomy63
1999 - 2003 7.3L Power Stroke Diesel
4
Mar 12, 2006 08:17 PM
