I have a good amount of parts for the 4d55t. If anyone is interested and looking for something in particular feel free to contact me.
I am trying to convert my ranger diesel to standard mitsubishi pulleys, I am having a hard time finding an alternator with the vacuum pump still attached, if you still have the alt/vacuum pump I would be very much interested in it.
on ebay i was finding new alternators complete with vac pump for the 4d55, but they were for the mitsubishi triton/pajero so I'm not sure if the pulley offset and diameter is the same...
if you have any of these parts please contact me through pm or email, thanks!!
Hey guys, brand new to the forum and desperately in search of a harmonic balancer for the 1987 ranger I recently bought with the Mitsubishi 2.3 in it. Anyone know of one? Or better yet have one for sale?
I have most parts. OR I can tell you where to get good parts. China stuff on ebay junk! The only part really hard to find for the ranger specifically are the pulleys and damper. Everything else is a match to the mitsubishi. ITM makes pistons in standard .020 and .040 over.
Mitsubishi still carries rocker arms. I have these too if needed. I also have rebuilt balancer shafts (Chrome plate for wear) and new oil pumps. Call me with your parts needs 818 268 3012 [email protected]
I've got a 1984 Mighty Max with a 4D55 and need some rocker arms. Do you have any?
Wrong they have a balancer which is almost impossible to find. SomeOne please post a picture of a ranger diesel balancer. The pulleys for the ford ranger diesels where from ford . You could convert to the mitsu set up as parts are plentiful google craigslist 4d55 to find stuff too. Guy is selling while motor for 350 now
I kept trying to upload a pic but no luck.
the crank pulley, which runs two belts is the harmonic balancer u can tell that by the 4 holes drilled on the inside lip.
if anyone wants a pic of it or any help finding parts contact me at 386-209-2275 James Conway
Last edited by Conwayautoparts; 08-11-2015 at 06:25 PM.