D44 / D50
Thread Starter
|
Senior User
Joined: Sep 2004
Posts: 153
Likes: 0
D44 / D50
I've got the D50 IFS on my 97 F250 and have found a HP D44 from a later F250 that I'd like to swap in. My questions are: Can I reuse my brakes and knuckles from the D50 on the D44? Are the tie rods the same?
Thanks,
-Andrew
Thanks,
-Andrew
Post Fiend
Joined: Mar 2002
Posts: 19,402
Likes: 38
From: Bonita Springs FL
A HP D44 from a later F250?
As far as I know, superduties got a solid Dana 50 or Dana 60 from '99 up.
I *believe* the spindle is different between a D44 and a D50, though, so brakes and knuckles will be different. Tie rods will swap over.
But I still don't know what axle you're talking about.
As far as I know, superduties got a solid Dana 50 or Dana 60 from '99 up.
I *believe* the spindle is different between a D44 and a D50, though, so brakes and knuckles will be different. Tie rods will swap over.
But I still don't know what axle you're talking about.
Thread Starter
|
Senior User
Joined: Sep 2004
Posts: 153
Likes: 0
I meant older F250. I'm not really sure what year it is. But I thought I read somewhere that the D50 on the F250s (my 97) had 44 outters with a 60 center section. Maybe not... I'm not really sure, that's why I'm asking.
