Good floor shift 4 speed.
Good floor shift 4 speed.
Senior User
Joined: Sep 2004
Posts: 323
Likes: 3
From: m571.com/yblock
Chip: no need to be sorry -- I was just telling you where you could find the information without having to type it twice! You are cool, there's no harm in looking for information and asking questions.
Senior User
Joined: Jun 2005
Posts: 495
Likes: 0
4 speed floor shifter for 292
Hi Chipmunck:
The four speed manual tranny that came factory bolted to the 292 Y8 in the 50's-'64 was the Borg Warner T-98. It has a input spline of 7 1/4" long by 1 3/8" diameter X 10 teeth. Whatever you do stay away from the T-18! It's input spline is 6 5/8" long and 1 1/16 diameter X 10 teeth. I have a horror story to tell you about the T-18 - 292 link-up!! I'll post it later under the heading "Don't let this happen to you."
-1bigsteve (o:
The four speed manual tranny that came factory bolted to the 292 Y8 in the 50's-'64 was the Borg Warner T-98. It has a input spline of 7 1/4" long by 1 3/8" diameter X 10 teeth. Whatever you do stay away from the T-18! It's input spline is 6 5/8" long and 1 1/16 diameter X 10 teeth. I have a horror story to tell you about the T-18 - 292 link-up!! I'll post it later under the heading "Don't let this happen to you."
-1bigsteve (o:
Thread
Thread Starter
Forum
Replies
Last Post
WALFORD'S 56
1948 - 1956 F1, F100 & Larger F-Series Trucks
14
Oct 24, 2007 02:58 AM
ANIMAL
Clutch, Transmission, Differential, Axle & Transfer Case
7
Sep 4, 2002 03:31 PM
slik
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
2
Oct 12, 2000 07:50 AM
