2.891 or 3.062 Ford 9 inch case?
#1
2.891 or 3.062 Ford 9 inch case?
After pulling the axle on my 82 F100 I found that I have the 31 spline axles. I posted about that in another thread. Only other thing I need to know now is what spool bearing size it has. I've looked in the summit and jegs catalogs and from what I can see it looks like the 2.891 case has the 28 spline axles and the 3.062 has the 31 spline axles. I just want to make sure before I order the parts. Anyone know how to find out which is the correct one? Thanks Fred
#2
#3
Most 9"'s use the 2.89. I was told that mine would have the 3.062 since I have 31 spline axles. NOPE! Need to buy a set of 3.062 bearings?
http://www.maliburacing.com/ford_9_i..._nine_inch.htm
http://www.maliburacing.com/ford_9_i..._nine_inch.htm
#4
Thread
Thread Starter
Forum
Replies
Last Post
Oldschool1962
1961 - 1966 F-100 & Larger F-Series Trucks
2
01-10-2014 11:08 AM
1982fordf100
Clutch, Transmission, Differential, Axle & Transfer Case
6
03-17-2008 05:57 PM
1982fordf100
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
6
02-18-2004 06:36 PM