Picture needed
Thread Starter
|
Elder User
Joined: Jul 2004
Posts: 626
Likes: 0
From: People's republic of MA
Picture needed
This weekend I plan on tackling the ball joints on the front of my 2000 F250. I've been reading up on it here at the forum, and everyone mentions a piece of pipe made into a tool used to push the axle seals on... Could someone please provide me of a pic of this tool? 
Any help is greatly appreciated.
Thanks in advance
Any help is greatly appreciated.
Thanks in advance
Fleet Mechanic
Joined: Dec 2004
Posts: 1,365
Likes: 6
From: Ketchikan, AK.
the easiest thing i found..... is just ask your local dealer to borrow their seal driver..... mine here lent it to me for a few hours, and didnt charge me anything..... made things a ton easier !!
Trending Topics
Thread Starter
|
Elder User
Joined: Jul 2004
Posts: 626
Likes: 0
From: People's republic of MA
99f350, How thick is that piece of pipe? For some reason in the picture, that tool looks enormous to me.
mattd, thanks, I might have to run down there and ask them... didn't even think to do that
mattd, thanks, I might have to run down there and ask them... didn't even think to do that
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Top 10 Ford Trucks Coming to Mecum Indy 2026
Brett Foote
5 Best / 5 Worst Ford Truck Wheels of All Time
Joe Kucinski
Thread Starter
|
Elder User
Joined: Jul 2004
Posts: 626
Likes: 0
From: People's republic of MA
"
9" long
flange 3 3/4"
pipe 2 1/4 outside
hole is 1 1/2"
The flange fits the seal so as not to damage it.
I just used a rubber mallot and wacked it." --- Courtesy of 99f350
Hopefully he will chime in again and comment on how thick the pipe is, or if that matters at all.
9" long
flange 3 3/4"
pipe 2 1/4 outside
hole is 1 1/2"
The flange fits the seal so as not to damage it.
I just used a rubber mallot and wacked it." --- Courtesy of 99f350
Hopefully he will chime in again and comment on how thick the pipe is, or if that matters at all.