Hello, I am getting ready to put a disk break conversion on my 61 unibody and getting ready to start puting the truck back together. i am looking for the metal sill plate things that hold the carpet down by the door steps. or at least one. i work at a machine shop and if i had just one i could make the other. anybody know where a person could find these. they must not make aftermarket ones either.cant seem to find one or two anyplace. any help would be appriciated..Tom

 

I have a pair of them, a bit rough but they are not the easiest thing to find in the 1st place...as for one to make another, they are different R to L....drop me an email for more info if interested.


cs65

 

I have a NOS pair.

 

I had a guy e-mail me that had a used pair..I am buying them..Thanks guys.About the only thing i need now is the round rods that hold tailgate level when it is open. but i think they must be imposible to find..Tom

 

I may have a pair, or at least one. I'll look. If not, shouldn't be too hard to make. A little heat, a little hammer work...

 

give me a holler if you have one of the tailgate rods that hold tailgate level when open..Tom

 

will do....