Looking for air pump part... see inside
#1
Looking for air pump part... see inside
Hello all,
I am in the Portland area and in need of the H pipe (above the drivers side cylinder head) that connects to the air pump. I figured someone that has gone to headers may have one lying around. Checked the local boneyards to no success. I can send a picture of what I need if anyone has one.
1989 F250 351W
Thanks
I am in the Portland area and in need of the H pipe (above the drivers side cylinder head) that connects to the air pump. I figured someone that has gone to headers may have one lying around. Checked the local boneyards to no success. I can send a picture of what I need if anyone has one.
1989 F250 351W
Thanks
#3
So you need the pipe between the two exhaust manifolds or the part that comes off the pipe that the air pump hose connects to?
I got one of the screw things that goes on the pipe a few years ago at a parts store. If its the pipe your looking for I don't know. Possibly dealer or bone yard. Some yards will do a search and can possibly get one from another yard in another state(thats how I got a working air pump). I twisted mine trying to get the old screw off and used JB Weld to fix the hole I tore in mine and I than had to hack saw off the rest of the screw to get the new one on.
Good luck
I got one of the screw things that goes on the pipe a few years ago at a parts store. If its the pipe your looking for I don't know. Possibly dealer or bone yard. Some yards will do a search and can possibly get one from another yard in another state(thats how I got a working air pump). I twisted mine trying to get the old screw off and used JB Weld to fix the hole I tore in mine and I than had to hack saw off the rest of the screw to get the new one on.
Good luck
#4
dsldandually-- I did not check Westbrook- just Copp and another in North Yarmouth. I will try them.
7283-F250-- I think they connect to the exhaust manifold, it is an H pipe that sits up on top of the valley, to the drivers side (next to intake manifold).
I can get it from the dealer, but they only sell it as a whole replacement for $125, you can't just get the connector. Seems crazy to spend that kind of money. I did buy some JB Weld, that might be the solution.
Thanks for the help!!
7283-F250-- I think they connect to the exhaust manifold, it is an H pipe that sits up on top of the valley, to the drivers side (next to intake manifold).
I can get it from the dealer, but they only sell it as a whole replacement for $125, you can't just get the connector. Seems crazy to spend that kind of money. I did buy some JB Weld, that might be the solution.
Thanks for the help!!
#5
Thread
Thread Starter
Forum
Replies
Last Post
70mazie
1967 - 1972 F-100 & Larger F-Series Trucks
8
11-25-2014 05:07 PM
Jodell
Performance & General Engine Building
2
04-05-2008 12:31 PM