where can i find fenders for my 62 f100 truck?

 

If you find some that arent sky high let me know.any i find that arent rusted out are bringing big bucks.dont know what your wanting or willing to spend but from time to time ebay has them.

 

hi a friend has a set already repaired and primed ready to bolt on for $250.Just thought Id pass this on Idont need them mine are good.

 

Are unibody front fenders unique? They look the same as up to '65 to me, but not real sure.

 

front fenders are the same,doors are different..Tom

 

Thanks Tom, that's what I thought. The sky high cost issue got me thinking they were unique.

 

so the doors of my 65 wont work on my 62 unibody? Jeff

 

they will work. the difference is you wont have a straight body line you will have the dip. the 61-63 has the staight body line and the 64-66 has a dip in the body line , just on the doors

 

64 to 66 doors will bolt up. but it will mess up the body line. Good uni doors are becoming harder to find.

61 to 66 F100 F250 4x2 fenders are the same along with 66 F100 4x4
61 to 66 F250 4x4 and F350 4x2 have the larger wheel opening for the 16.5 and 17" tires.

There are sources out there for sheet metal but i hesitate to post them here. What part of the fender is bad. A front half and rear half of the fender is produced in stampings and can repair just about the entire fender.

New fenders are avalible in fiberlgass.

I save every one i get just for patch panels. I have even had a good skin fender with a rotted away top mounting, and repaired this with a smashed fender that had a good top. I cut the spots welds and re welded it back together.

Garbz

 

i guess i will patch my doors both have a small rust spot at lower rear. my fenders are good thanks for the info saved me a lot of work changing doors.guess ill sell the 65 doors,jeff