my wife says thanx she did most of the work, i just basicaly grunted and pointed!!!! she did a great job of translating my crazy thoughts!!!

 

https://www.ford-trucks.com/user_gal...&albumid=14613

https://www.ford-trucks.com/user_gal...=67192&width=0

I like either one of these two. Be hard to tell which I like best. Both look real good. Maybe a poll would help settle things out a bit.

 

Havin' to choose.

I like the Schooner/no Schooner/Blue oval flamed- all equally.
So I ain't gonna be any help...

Soon as I get Wilma the Wicked rolling I'm gonna mock up a Schooner top outta fiberglass for her- white with the Chapter Logo on both sides.

Loud and Proud!

W/K

 

Okay, according to Dennis(Mil1ion) we must use the unaltered FTE logo. Just using www.fordtrucks.com will not be allowed. Something else that we might want to keep in mind is not making it too elaborate or using too many colors. Hey Tim, if we turn this into a window decal or sticker is there a recommended color limit? Also, personally I would think that the less ornate the better. I would think that we would want anybody on the streets to easily see and read the www.ford-trucks.com logo, as they drive past our trucks?

With that being said here are my new contributions:

(Again, the visit www.ford-trucks.com text in the top left will not appear in the final image.)

Plain OK State border with Comic Sans Chapter Fonts on Top.
https://www.ford-trucks.com/user_gal...oid=68008&.jpg

3-D OK State border with Comic Sans Chapter Fonts. No shading in 3-D border.
https://www.ford-trucks.com/user_gal...oid=68007&.jpg

3-D OK State border and 3-D Word Art Chapter Fonts. Border and Fonts in Navy Blue, and state shadow in gray.(My personal Favorite.)
https://www.ford-trucks.com/user_gal...oid=67999&.jpg

3-D OK State border and 3-D Word Art Chapter Fonts. Border and Fonts in Black, and state shadow in gray.(
https://www.ford-trucks.com/user_gal...oid=67998&.jpg

3-D OK State border. Gray shading on border shadow. Plain Comic Sans Chapter Fonts on Top.
https://www.ford-trucks.com/user_gal...oid=67997&.jpg

3-D OK State border and 3-D Word Art Chapter Fonts. Border and Fonts in Navy Blue, and state shadow in gray. Chapter Fonts on bottom.
https://www.ford-trucks.com/user_gal...oid=67996&.jpg

3-D OK State border and 3-D Word Art Chapter Fonts. Border and Fonts in Navy Blue, and state shadow in gray.Chapter Fonts modified on bottom.
https://www.ford-trucks.com/user_gal...oid=67995&.jpg

3-D OK State border and 3-D Word Art Chapter Fonts. Border and Fonts in Navy Blue, and state shadow in gray. Chapter fonts on top and with dark gray shadows.
https://www.ford-trucks.com/user_gal...oid=68006&.jpg



I've got more samples coming. I must say I'm impressed with the responses and other samples submitted by ya'll so far. I gotta say those flames look cool. Keep 'em comin'.

 

Hey Ron (and everybody else) ,

I called about getting bumper stickers/decals made up. I just wanted to find out what type of costs would be involved. They stated that anything over 4 colors or having shading will really push up the cost. Sorry Brian, that kinda kills the flame idea unless we just made them a solid color.

The price for a 10" x 6" decal would be approx. $4.85. This is for any quantity and might go down if we did more than 100. (I think we'll stick with a small order.) This price was a swag so we would have to nail down a firm price.

Now for a design....here's another idea using a couple of the designs together: https://www.ford-trucks.com/user_gal...oid=68014&.jpg

If we used an oval around a logo (any logo), they would be able to actually cut the decal as an oval.

OK, so there's another submission from me....let me know what you think.

Tim

 

You might try looking into cafeshops.com they can make decals and other items from your image files. The prices are not bad and there are many designs to choose from. A few chapters have even opened their own stores on the site. Just a thought. I have bought many items from oval stickers to mugs and shirts, all have been good quality.

 

Okay, here's my last three attempts at a logo.

This one uses the combined State, FTE Logo, and Ford Oval. Plus it uses Comic Sans Font for the Chapter Titles.

https://www.ford-trucks.com/user_gal...oid=68290&.jpg

Same as above, but with smaller Chapter Titles so that the FTE Logo is more prominent.

https://www.ford-trucks.com/user_gal...oid=68291&.jpg

This is just for kicks. The idea looked better in my head.

https://www.ford-trucks.com/user_gal...oid=68292&.jpg

 

here's a revised version of our previous logo with no flames and only four colors.

https://www.ford-trucks.com/user_gal...&albumid=14613

hey Stan, maybe we can start another poll after the first is done to choose after all entries are in. maybe set a deadline for entries, just a thought.......

 

You're killin' me Brian!

One week from today?? Tuesday the 15th? Since I can only do 10 options to the polls, the designs not recieving a vote in the last poll will be removed to make room for the new ones.

Tuesday people!!!

Keep in mind, this is for printing, not for the actual Chapter Logo. . . so keep the colors down. Later on we'll go "hog-wild" on a logo. . . cool??

STan

BTW: I like that last submission SWC.

 

Okay, scratch that last post... same guidelines... but...

YOU HAVE UNTIL THE LAST DAY OF THIS MONTH TO MAKE YOUR SUBMITION FOR CHAPTER LOGO.... TO BE PRINTED.

STan

 

I'm with you guys.

Also BTW- Fordborn's idea about Cafepress shop is
good. I'd like a beer stein and coffee mug with our Chapter logo on them.

Mark

 

Don't want anybody to forget about this!!!

Anymore submissions???

STan

 

i pull my first submission and make this my only one........its pleasing to the eyes and only 4 colors!!!


https://www.ford-trucks.com/user_gal...&albumid=14613

it will work this time...

 

Tried to click on the link. It came up as The page cannot be found.

Mike B

 

i dont know what happened but i fixed it...