Does anyone know of a shop in bama that can bore and sleeve my block?I had a line up on one but have lost the email/message.I need to find someone that has done it before ASAP since teh block is ready and sooner I get this one done the sooner I can pull the Enterprise down and start the build up.

 

I don't know of a shop in Gadsden, although I'm sure there's one there. I live in Huntsville and there is a shop here that can do it, or at least the last time I was there they could. General and Automotive Machine shop (256)539-0719.

 

Thanks.Called and they want $1500 to bore,sleeve,deck,cam bearings,etc.I just put my internals back in and go.

 

I don't know the name, but if you'll go North on Hwy 411 outof Gadsden, there is a small automotive machine shop on the left hand side,maybe within 20 miles of town. I'm sorry that's so vague, but you really have to look for the name, because it was on the front of the building, which faces north, therefore you gotta look back to see it when you are driving north. It's right off the road, and is a small metal building, kind of rounded, not the standard square or rectangular shape.Again, sorry so vague.

 

.... huh?

 

Roland Machine and exhaust in Hazel Green does that I believe. You might also check out R&R speedshop in Huntsville. I'm not really sure about R&R though.

 

R&R is a good shop. They did the work to my 302. 256-532-0890