Bronco II heater
Thread Starter
|
Elder User
Joined: Aug 2000
Posts: 763
Likes: 0
From: home
Bronco II heater
I have a 89 Bronco II. I bought the car 2 years ago and went thru everything under the hood. Engine rebuild (World Casting heads)radiator,heater core,thermostat 190,water pump,hoses,belts etc. The heater air volume does not seemas strong as that on my 92 v/8 F150 or 93 Aerostar.The water temp in the heater is very hot but the air volume is not what I think it should be. What a new heater motor from a local parts store give more volume than the one in the car?
Avanti John
Avanti John
Posting Guru
Joined: Feb 2000
Posts: 1,100
Likes: 0
From: Wichita USA
Bronco II heater
Since you appear to have enough heat going to the heater two things come to mind. Check for proper blend air door function and check for a blocked evaparator. Also if the blower motor has been changed with a cheap
after market one it is possible to wire them so they run backwards.
2000 XLT Flare Supercab Sport 5.4-Auto-355LS-Tow pkg-Bedrug-Xtang Tonneau
after market one it is possible to wire them so they run backwards.
2000 XLT Flare Supercab Sport 5.4-Auto-355LS-Tow pkg-Bedrug-Xtang Tonneau
