When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
:-staun
I have a 91 ford explorer 4wd. The transmission just stop pulling. It never slipped are anything it just stopall together. I pulled the stater and checked the flywheel and converter all was fine So I pulled the pan the fluid and filter were ok. So what could of happen? I had just drove it over 200 miles and it died when I stop to refuel?
There are three condition tests that you need to do. Tell me how it operated in; reverse, manual low (1), and manual (2). I allready assume it doesn't do anything in Drive. Try to be specific.