Whipple 3.0 Vulcan supercharger
#1
Whipple 3.0 Vulcan supercharger
Now becoming available. High quality kits designed specifically for the Ford OHV 3.0. Has been retrofitted to a 98, but is designed for 02 & up to be carb certified and retain factory warrenty. Estimated cost $2600. Cost from Ford dealer is of yet unknown. Included new throttle body, 4.0 MAF, computer reflash, intake, filter, and larger injectors. Bumps horsepower to 230 and torque to 260. Can be installed with no other engine mods.
#2
#3
Actually, the retrofitted truck was a 99 and he changed some parts. I will quote him from a different board that I visit:
"...on my 99' and make the effort to redesign the kit to work. I simply swapped to a 02up lower intake but I also had to swap injector connectors, mass air flow connectors, and totally remove my EGR..."
So far, this guy loves the kit and has even tested it on a chevy. (evil grin) Nothing bad from it, yet.
"...on my 99' and make the effort to redesign the kit to work. I simply swapped to a 02up lower intake but I also had to swap injector connectors, mass air flow connectors, and totally remove my EGR..."
So far, this guy loves the kit and has even tested it on a chevy. (evil grin) Nothing bad from it, yet.
Thread
Thread Starter
Forum
Replies
Last Post
F-WhiteThunder
1983 - 2012 Ranger & B-Series
3
06-09-2023 09:05 AM
edtahaney
General Diesel Discussion
8
03-16-2015 01:22 PM
Honda Monster 222
1983 - 2012 Ranger & B-Series
14
12-02-2013 08:00 PM
ddwood55
1983 - 2012 Ranger & B-Series
2
08-30-2012 06:00 PM