replacing wheel bearings
Thread Starter
|
Freshman User
Joined: Nov 2003
Posts: 30
Likes: 0
replacing wheel bearings
I have a 92 Full size Bronco and would like to try to replace the front wheel bearing. Is there a thread somewhere that will give me a step by step instruction and tools required for this job? I would appreciate any help with this. Average mechanic ability but enjoy working on Bronco. Thanks all Texasgoat
Lead Driver
Joined: Jul 2003
Posts: 7,406
Likes: 52
From: Wheatland, Mo
Try this one. Since you have to remove your hubs in the process, look for hub repair there too.
If that one doesnt have what you are looking for, then try this site...its for cjanhging ball joints so just stop when you get to the bearings.
http://www.off-road.com/ford/bigbro.../balljoint.html
If that one doesnt have what you are looking for, then try this site...its for cjanhging ball joints so just stop when you get to the bearings.
http://www.off-road.com/ford/bigbro.../balljoint.html
Lead Driver
Joined: Jul 2003
Posts: 7,406
Likes: 52
From: Wheatland, Mo
HMMMM Looks like that second link may have pasted wrong here it is again.
http://www.off-road.com/ford/bigbron...balljoint.html
http://www.off-road.com/ford/bigbron...balljoint.html
