Keyless Entry Problems
Thread Starter
|
More Turbo
Joined: Sep 2003
Posts: 514
Likes: 27
Keyless Entry Problems
My keyless entry doesn't work. I used the two key method and got the original code. Nothing. Is it supposed to light up when I touch it? It doesn't.
I see online that the door panel has to be removed to replace the pad. Any tricks to do this?
But my major question is has anyone else had this problem that turned out NOT to be the touchpad?
Thanks,
R.
I see online that the door panel has to be removed to replace the pad. Any tricks to do this?
But my major question is has anyone else had this problem that turned out NOT to be the touchpad?
Thanks,
R.
Tuned
Joined: Oct 2009
Posts: 417
Likes: 134
From: South Texas
if it doesn't light up, gives you the indication it is not getting power. Solution?: check fuse, connection and voltage? I would guess you will need to gain access to the back of the panel, inside the door by taking the door panel off.
Thread
Thread Starter
Forum
Replies
Last Post
edub152
1997 - 2006 Expedition & Navigator
5
Sep 13, 2015 08:50 PM
