300 6 E4OD trans question

Reply Subscribe

Thread Tools

Search this Thread

Aug 5, 2024 | 06:40 PM

92F150300Six

Thread Starter

2nd Gear

Joined: Aug 2024

Posts: 2

Likes: 0

300 6 E4OD trans question

Will a small block 302 EOD fir my 300 6? I need a good used one so I can get this truck up and going and then rebuild the one I have in it now. Do I have to get one out of a truck with a 300 6 in it? What are my options here guys??? Any help is appreciated...

Chuck.

Aug 5, 2024 | 06:55 PM

OBSession05

Laughing Gas

Joined: Jul 2023

Posts: 991

Likes: 317

Short answer is yes, it will work.

300, 302, and 351 all share the same transmission bolt pattern.

Aug 5, 2024 | 06:58 PM

92F150300Six

Thread Starter

2nd Gear

Joined: Aug 2024

Posts: 2

Likes: 0

Thanks for the reply.....You said short answer........What else do I need to know for this change out?

Aug 5, 2024 | 08:20 PM

OBSession05

Laughing Gas

Joined: Jul 2023

Posts: 991

Likes: 317

I have not done it myself so wait for someone to chime in. So I'm told they can but no idea if there's any change in wiring. I would think there's no change whatsoever but don't quote me on that.

Aug 5, 2024 | 08:33 PM

rla2005

Fleet Owner

Joined: Oct 2005

Posts: 20,785

Likes: 1,751

From: Kentucky

Plug-n-play would be a 1992 to 1994 E4OD.

1991 and down would require swapping the transmission gear selector lever on the driver side of the transmission.

1995 and up would require swapping the solenoid pack due to internal electrical changes. Keep the new style MLPS and swap in the newer connector.