When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have an '03 F250 SD w/6.0 powerstroke and automatic transmission. I am trying to identify what tranny I have and have attached a photo of the label plate on the side of it to possibly help. If there is another way to determine what I have I sure would like to know! Also I am trying to find out exactly where the Neutral Safety Switch is located. I have heard on drivers side under the shift cable but I don't see anything like it. Is it on top of the tranny?
Thanks for any help from the pro's on here!
The only automatic ever available with the 6.0L was the 5R110W TorqShift.
The Neutral Safety Switch is inside the pan.
Okay, thanks Mark for the insight. I am having a no crank, no start issue and have been told by many people it's the NSS but if it is in the pan I am not so sure about that. I have verified the starter and relay is good and have changed the ignition switch and running out of ideas.
