cruise control and horn not working, broke steer
#1
#2
The bearings probably went bad in the steering column,, and that in turn might have broken the 3 point carbon brushes under the steering wheel. These carbon brushes are what makes contact to complete the circuit for the horn and cruse. There is a 3 run copper runway mounted to the bottom of the steering wheel that the carbon brushes ride in. The runway may also be damaged.
#4
Join Date: Mar 2005
Location: Marlboro Mental Hospital.
Posts: 60,970
Received 3,100 Likes
on
2,162 Posts
Thread
Thread Starter
Forum
Replies
Last Post
fordbronco1966
1999 to 2016 Super Duty
12
12-18-2008 01:40 PM