So I'm going to pull the 351Measly out of my 77 F250 4x4, I have a 76 F150 2wd I bought for the 300, what engine perches do I need to put the 300 in my 77 F250 4x?
Does anyone have them, JYd's out here are mostly newer trucks, don't know where I can source them.
Thanks
Joe

 

ck with KingBee in parts

 

You need engine perches from a 300 6 cyl or 360/390FE truck 1973-1979.

 

Nos 1960s 1970 Ford Truck 4 X4 Engine Mount Support D6TZ-6028-A Rh he responded he only has the one

• Make an offer:
  brand new

• 
• 
• 
• 

1

• 
• 

as of (ND) Bills info D6TZ-6028-A and D6TZ-6029-A to put the 300 in a 4x4 ( ebay has this one I didnt put the other # in) I wrote the guy to see if he has the left as well

$49.99

+ $15.50 Shipping
Buy It Now
Add to cart
or Best Offer
Make Offer

• Get it by Friday, Mar 1 from Stoneville, North Carolina

•  • New condition
•  • 14 day returns - Buyer pays return shipping

4X4 Truck Motor Mount Support D6TZ-6028-A books shows this fits several years from the 1960s to the late 1970s 300-390 please look at pics to confirm these parts came from my uncle and I don’t no much about truck parts Thanks Nat
See details
Watch
Sold bynatsnos (153)99.4% Positive feedbackContact seller

 

So will the ones in my 76 2wd with 300 I'm pulling work on the 4x?

 

I think so, number dummy could tell you for sure as he knows all the part numbers.

 

2WD engine supports (aka towers/stands/perches) are completely different than 4WD engine supports.

2WD supports bolt to the frame and engine cross member. 4WD's do not have an engine cross member, bolt to the inner frame rails.

Upper pic: 1977/79 4WD .. compare to the 2WD lower pic. Supports are basic number 6028/6029

 

So,,, are the engine supports (aka towers/stands/perches) the same, and just the motor mount,,,aka rubber part bolted to engine different?

 

I have a lead on 351m4x4 engine stands

 

Look at the pic, the 2WD supports are different than the 4WD supports. The 240/300 rubber insulators are the same 2WD/4WD but are not the same as 360/390.

 

I'm sorry, I worded that wrong, I should have asked, are the supports in the 4wd the same for 240/300 and V8's, just the rubber insulators are different? Thanks Bill.

 

Fixed it for you...

 

Looking at the pics, the supports on the 4wd V8/I6 are the same #,,, the insulators are what's different, that is what cornfuses me I know on a 2wd I just unbolt, and move the supports forward.

 

I have a set of 352 perches on a 2 wd frame from a 66. 352 is same as 360/390??

 

My question is ,,,,,,,,the engine stands for the 351m/400 4x4 are they the same as 300 I6 4x4 sure easier finding 351m engine stands 4x4 ,,,,Bronco graveyard sells them,,,,,,70 series