anyone installed any cameras on their 2011-2016 super duty? Ive got a third brake light with the factory camera form a 2017 super duty. I also have the switch which was used on the same truck to activate it when needed. im wondering how the best way to install it (wiring) to my Sync 3. im thinking if I ran the new wires from the camera to the switch above the headliner which ive also installed up there. then run the wires down to the stereo where it would be tapped into the video feed of it so the picture would show up on the sync screen. im sure I would have to install a relay somewhere in the mix. Does anyone have any ideas on how this could be done.