suggestions for Cam and Heads for 302
#1
suggestions for Cam and Heads for 302
Hey everyone,
Looking for some advice on getting a new cam and heads for my 302 engine that will give me more hp and performance.
Current setup on my 78 f100 2wd shortbed
94 302 engine block (bored out at 30 over)
Edelbrock performer carb 600cfm
Edelbrock performer Intake manifold
Bbk shorty headers
Was looking into the lunati voodoo cam but not sure what heads would pair with it.
Thanks everyone!
Looking for some advice on getting a new cam and heads for my 302 engine that will give me more hp and performance.
Current setup on my 78 f100 2wd shortbed
94 302 engine block (bored out at 30 over)
Edelbrock performer carb 600cfm
Edelbrock performer Intake manifold
Bbk shorty headers
Was looking into the lunati voodoo cam but not sure what heads would pair with it.
Thanks everyone!
#2
Cost wise a set of GT40 or GT40P heads would be the cheapest unless you can find a set of used aftermarket heads for sale.
If you buying new then we'd have to know your budget?
Do use a roller cam as that block is roller ready and consider adding a set of roller rockers with the 1.7 ratio.
If you buying new then we'd have to know your budget?
Do use a roller cam as that block is roller ready and consider adding a set of roller rockers with the 1.7 ratio.
#3
Thread
Thread Starter
Forum
Replies
Last Post
fatfenders
1948 - 1956 F1, F100 & Larger F-Series Trucks
5
02-12-2006 07:25 PM
gunz4life2
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
17
04-03-2005 03:22 PM