Brush-guard will it fit my 2008 350 SD?
#1
Brush-guard will it fit my 2008 350 SD?
I have a chance to grab up a nice stainless brushguard for my 08. It states it's for a 11-16 SD. Can't find anything anywhere to see if it will fit. I don't know the brand to call in a fitment request, and as far as I can tell the frames on the SD's are the same from 08 up.
Anyone have any intel??
Greatly appreciated. It's too far away to just go see if it will work. But the price is definitely right.
Denny (Thanx)
Anyone have any intel??
Greatly appreciated. It's too far away to just go see if it will work. But the price is definitely right.
Denny (Thanx)
#4
#6
I'm with you Fritz, that's why I called the Mfr. I'm still raising my eyebrows on they're response as well.
Digging into all information. It's a nice unit for 250 never mounted and I just have that "I would really like it" bump down there.
I'll keep everyone informed when I get a conclusion.
Seth I do have 1 picture of it, but it doesn't really give a good shot of the mounting area. Thus pix won't solve this.
The guy lives an hour and a half from me. Otherwise I would have strapped in allready.
Thanx,
Denny
Digging into all information. It's a nice unit for 250 never mounted and I just have that "I would really like it" bump down there.
I'll keep everyone informed when I get a conclusion.
Seth I do have 1 picture of it, but it doesn't really give a good shot of the mounting area. Thus pix won't solve this.
The guy lives an hour and a half from me. Otherwise I would have strapped in allready.
Thanx,
Denny
#7
This is a fact. These guards always have mounting brackets that are not integrated into them, so the guard may be the same and take different brackets. Although that would surprise me too, because the guard I have on my 08 is markedly different than the one on my father in laws 2016 because they follow the contour of the headlights. But I've seen a Chevy in town that is rocking a RH guard that was obviously made for a 99-07 Ford. They made it work, but it doesn't look right,,,
Trending Topics
#8
Just an update. Took the trip.
The mounts were hard and wouldn't align by any means. The headlight pattern was fine but the offset from the nose was too close and the cost of fabbing them to work with stainless mounts would have been more than a factory unit. Thanx for all the input. It was pretty, but.........ya know.
Denny (No Seth, no pictures...........give a guy a break)
The mounts were hard and wouldn't align by any means. The headlight pattern was fine but the offset from the nose was too close and the cost of fabbing them to work with stainless mounts would have been more than a factory unit. Thanx for all the input. It was pretty, but.........ya know.
Denny (No Seth, no pictures...........give a guy a break)
Thread
Thread Starter
Forum
Replies
Last Post