1978 ford bronco saginaw swap
#1
1978 ford bronco saginaw swap
hey guys i got a 78 ford bronco with a 460 and c-6 someone before me put in motor and a Saginaw power steering pump they took two high pressure hoses and made one with a compression fitting well after years and years of running it the pressure fittings arent holding it anymore and the line leaks anyone know what hose i should buy preferably not one i have to cut and splice thanks
#2
I would try one made for a 80's 460 powered van. Vans usually had the Saginaw pump. I don't know if vans were available with 460s in the 70's. You should bring your hose to the parts store and compare the fittings before buying. Or you could go to a truck stop and have them make you a new one from scratch.
#3
Find out what year of brackets hold the sag pump on and get lines from the closest year of 460 van to that.
or I can reference some numbers for my 85 swap when i get home. Mone is in the works with AN lines, but the port thread sizes should be the same.
iirc the pump outlet is an m16x1.5 special o-ring.
or I can reference some numbers for my 85 swap when i get home. Mone is in the works with AN lines, but the port thread sizes should be the same.
iirc the pump outlet is an m16x1.5 special o-ring.
Thread
Thread Starter
Forum
Replies
Last Post
randre
1973 - 1979 F-100 & Larger F-Series Trucks
5
10-01-2018 07:34 PM
460 FORD MAN
1973 - 1979 F-100 & Larger F-Series Trucks
2
02-04-2017 08:15 PM
2Wise4aGM
1987 - 1996 F150 & Larger F-Series Trucks
4
12-19-2002 11:10 AM