Metalwork - saws? - Ford Truck Enthusiasts Forums

Notices
Garage & Workshop Tips & Ideas for the garage or workshop. No Truck Tech Discussion
Sponsored by:
Sponsored by:

Metalwork - saws?

Reply

 
 
 
  #1  
Old 09-16-2018, 01:31 PM
KC8QVO's Avatar
KC8QVO
KC8QVO is offline
Posting Guru
Thread Starter
Join Date: Jul 2008
Posts: 2,111
KC8QVO is a name known to allKC8QVO is a name known to allKC8QVO is a name known to allKC8QVO is a name known to allKC8QVO is a name known to allKC8QVO is a name known to all
Metalwork - saws?

Does anyone have any ideas on a durable saw for metalwork that I can get through a hole?

I burned out my jig saw (skil saw that lasted about 20 years) and need to replace it. What really stressed it was cutting metal and I found a larger reciprocating/demo saw blade that had a small enough shank to fit the jigsaw that I used to cut thick wood - too much blade for the saw.

What I want is a band saw with a strong motor. I can swap blades for cutting metal and wood. The problem is I can't get a band saw blade through a hole to cut from the inside. Half of my projects involving metal have some kind of interior hole I need to cut - fitting electronics in dash consoles (rectangular holes), cutting holes for fitting pipe in square tubing (in place of hole saws), ect. I like the versatility of a jig saw with an adjustable angle plate, and the Skilsaw I have even has a rotating shank so I can set the blade at any angle with respect to the rest of the unit - cut sideways, backwards, or at an angle. That is really handy when cutting in wood or drywall with the hole horizontal.

Is there such a saw that exists that is more robust (table/bench top even) than a jigsaw and will hold up to cutting metal while being able to get a blade through a hole?

I'm starting to think I need a band saw regardless - for the exterior cutting and straight cuts that might be the best and keep wear off of a jigsaw....

I'm down to a hand-held circular saw (another skilsaw - I like them a lot) and 4.5" angle grinder with cutoff blades for cutting metal. I can't cut circles with either, though I can plunge cut for inside holes if they are big and straight enough.....
 
Reply With Quote
  #2  
Old 09-16-2018, 11:09 PM
ford2go's Avatar
ford2go
ford2go is offline
Postmaster
Join Date: Apr 2003
Location: Frequently frozen MN
Posts: 2,890
ford2go has much to be proud offord2go has much to be proud offord2go has much to be proud offord2go has much to be proud offord2go has much to be proud offord2go has much to be proud offord2go has much to be proud offord2go has much to be proud offord2go has much to be proud offord2go has much to be proud of
Next size up is a sawzall -- and they're generally pretty heavy and a bit awkward. But they're powerful and there are a lor of blades available.
Maybe somebody makes a smaller one.

But, I wouldn't necessarily give up on jigsaws --it might just be part of the cost of your business - replacing the saw from time to time. ALso, there might be an industrial version that's more rugged.

hj
 
Reply With Quote
  #3  
Old 09-16-2018, 11:27 PM
ford390gashog's Avatar
ford390gashog
ford390gashog is offline
Post Fiend
Join Date: Jan 2004
Location: Brentwood,CA
Posts: 15,575
ford390gashog is a splendid one to beholdford390gashog is a splendid one to beholdford390gashog is a splendid one to beholdford390gashog is a splendid one to beholdford390gashog is a splendid one to beholdford390gashog is a splendid one to beholdford390gashog is a splendid one to behold
Really a jigsaw is your best option. Or upgrade to a plasma.
 
Reply With Quote
 
 
 


Thread Tools
Search this Thread

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.